The1's Daily Daily Barina XC

Post Your Delco Powered Ride Here
User avatar
Posts: 4159
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Daily Daily Barina XC

Postby The1 » Mon Oct 07, 2019 8:46 pm

Biggvl wrote:Parts department of most Holden dealers will give you the immo code over the phone


some will, some dont, not as much fun as ripping it out yourself though lol

User avatar
Posts: 4159
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Daily Daily Barina XC

Postby The1 » Mon Oct 21, 2019 8:51 pm

got MPPS cable today, got it to do a full read of the ecu. I had to select ME7 to get it to connect and read.
Attachments
Barina XC 1.4 Z14XEP Manual.bin
(512 KiB) Downloaded 31 times

User avatar
Posts: 9864
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: The1's Daily Daily Barina XC

Postby Holden202T » Tue Oct 22, 2019 12:07 pm

well thats a good start :)

User avatar
Posts: 4159
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Daily Daily Barina XC

Postby The1 » Tue Oct 22, 2019 5:49 pm

yeh have to do some research now, i might try and change something with tech2 and do another read and compare, im guessing it'l have checksums somewhere and security section with pin code maybe.

User avatar
Posts: 4159
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Daily Daily Barina XC

Postby The1 » Tue Oct 22, 2019 10:42 pm

Here's the same Bin, but used tech2 to change it to Auto, strange, it doubled the bin size and only added data after the end of the manual bin, changed nothing in the first half. I can change a few other items ill see what those do.
Attachments
Barina XC 1.4 Z14XEP Manual - Tech2 changed to Auto.bin
(1 MiB) Downloaded 28 times

User avatar
Posts: 4159
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Daily Daily Barina XC

Postby The1 » Tue Oct 22, 2019 11:19 pm

strange, changed it back to manual and did another read and it's now the same as the above one, I also tried another change set the aircon system to not present but it also reads the same, perhaps these settings are kept in the BCM even though im in the ECU programming menu. Either way it didn't shrink the bin size back down to half when going back to manual.

Posts: 2470
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: The1's Daily Daily Barina XC

Postby VX L67 Getrag » Thu Oct 24, 2019 11:20 am

I did start to get a few of these when they came through the workshop, yeah the opels seem to have same calibration in some auto/manuals so it must get defined by data coming back.

User avatar
Posts: 4159
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Daily Daily Barina XC

Postby The1 » Tue Oct 29, 2019 9:03 pm

do you have any other bin reads? Would be handy to cross reference.

This is a Bosch Motronic ME7.6.2

Ive started plotting some tables out but that's it so far. Ive determined there's no lean cruise by looking at the o2 sensor while on the highway it still fluctuates.

Posts: 2470
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: The1's Daily Daily Barina XC

Postby VX L67 Getrag » Thu Oct 31, 2019 7:32 am

Here's the files & info I have got when I've looked over the years!
Attachments
XC Barina Files I had.7z
(206.04 KiB) Downloaded 36 times

Posts: 2470
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: The1's Daily Daily Barina XC

Postby VX L67 Getrag » Fri Nov 01, 2019 9:44 am

337762E3-3553-4CE4-971C-FEE1E6E83824.jpeg
337762E3-3553-4CE4-971C-FEE1E6E83824.jpeg (92.65 KiB) Viewed 768 times
It shows ecm titanium old version has a couple of the files I had mapped out!

Generally just use there maps as a rough guide though!

PreviousNext

Return to Members Rides

Who is online

Users browsing this forum: No registered users and 1 guest