The1's Daily

Post Your Delco Powered Ride Here
User avatar
Posts: 6308
Joined: Mon Oct 08, 2012 6:41 pm
Location: Kyneton, Vic

Re: The1's Daily

Postby vlad01 » Wed Apr 12, 2017 3:45 pm

Valves need more angles :P
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.

User avatar
Posts: 4105
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Daily

Postby The1 » Wed Apr 12, 2017 4:17 pm

as long as the boost holds :thumbup:

User avatar
Posts: 4105
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Daily

Postby The1 » Thu Jul 11, 2019 8:50 pm

After a long time the L67 engine is finally built and in. Not without hassle cause of my own mistakes lol live and learn :hmm:

Build ended up being.

Stock Bottom end
Mains oil holes drilled to largest factory size
Rear main plate oil passage enlarged a little
Bottom end balanced
Removed Balance shaft and plugged oil hole
New Pistons Federal Mogul H871CPA
Total Seal Rings CR6684 gap 0.023/24
All new bearings Clevite
SS Stock valves reseated
All ARP bolts
double row timing chain
Clive Cams Camshaft 112LSA 201 Duration @ 0.050 0.507 Lift with 1.95 Yella Terra Rockers
Everything ported as per previous
10psi stock looking pulley on blower

I have another blower that ill mess with later, fit up a modular pulley to it. I have a stack of photos here but prob nothing that hasn't been seen before.

Now to have fun tuning it!

IMG_20190705_221804.png
IMG_20190705_221804.png (510.51 KiB) Viewed 153 times

User avatar
Posts: 9724
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: The1's Daily

Postby Holden202T » Fri Jul 12, 2019 11:38 am

all this thread is missing is a shed skid ;)

User avatar
Posts: 2016
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: The1's Daily

Postby Biggvl » Fri Jul 12, 2019 12:15 pm

And more pics :thumbup: :thumbup: :thumbup:
According to chemistry, alcohol is a solution...

User avatar
Posts: 4105
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Daily

Postby The1 » Fri Jul 12, 2019 12:41 pm

haha, ok ill post up a few more.

User avatar
Posts: 4105
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Daily

Postby The1 » Fri Jul 12, 2019 1:36 pm

Anyone come up replacement ideas for the factory push on fuel lines to the firewall from the fuel rail?

Ive gone through 2 hoses there all degraded and leak cause the rubber is failing, The supply line on the rail end on these L67's are larger, i found the VE Rail hose connector is the same size and isn't a compression fitting so i cut one off and made my own with double hose clamps and normal 10mm fuel hose. Holden dont stock or sell the fuel hoses new anymore, part number is 92078959. Only other thing im guessing i can do is replace the whole rail with aftermarket.

Posts: 129
Joined: Mon Feb 26, 2018 4:18 pm
Location: Tasmania

Re: The1's Daily

Postby Comcal76 » Fri Jul 12, 2019 4:37 pm

I have mine setup like this with 10mm fuel hose.
Attachments
IMG_20190712_163140.jpg
IMG_20190712_163125.jpg

Posts: 1107
Joined: Sun Mar 15, 2009 10:20 am
Location: Geelong, VIC

Re: The1's Daily

Postby yoda69 » Fri Jul 12, 2019 5:48 pm

What are the chances someone like Enzed or Pirtek could make one up.
Would have thought the actual connectors would be fairly standard.

Posts: 113
Joined: Mon Jun 29, 2009 9:43 am
Location: Western Queensland

Re: The1's Daily

Postby brindo » Fri Jul 12, 2019 5:54 pm

I thought EFI hardware have the quick connects, just need the hose then.

PreviousNext

Return to Members Rides

Who is online

Users browsing this forum: No registered users and 5 guests