dave V6 ek holden
-
- Posts: 100
- Joined: Sat Aug 21, 2010 3:12 pm
- cars: EK holden running vn v6
- Location: Geelong
dave V6 ek holden
ok guys my ek v6 project is coming to an end and id like thank everyone on here who has helped me with my questions
if you want to check it out its on the FBEK forum http://www.fbekholden.com/forum/viewtop ... &start=120
if you want to check it out its on the FBEK forum http://www.fbekholden.com/forum/viewtop ... &start=120
-
- Posts: 100
- Joined: Sat Aug 21, 2010 3:12 pm
- cars: EK holden running vn v6
- Location: Geelong
Re: dave V6 ek holden
for those intereted her the girl V6 ed
*Edited for a broken photo bucket link 22/9/2017 by Dylan*
have problem the the crs tee adapter for speedo seem to be a bit of junk to me ,, may go b&w tcc contollers or a gps speedo .. not sure yet
also i noticed the engine make a lot of sucking noise even with pod filter not sure if thats normal .. ?
Regards David
*Edited for a broken photo bucket link 22/9/2017 by Dylan*
have problem the the crs tee adapter for speedo seem to be a bit of junk to me ,, may go b&w tcc contollers or a gps speedo .. not sure yet
also i noticed the engine make a lot of sucking noise even with pod filter not sure if thats normal .. ?
Regards David
Re: dave V6 ek holden
yeh pod will make noise when open like that, id stick the pod down the front there in that free space and put it in some kind of enclosure, will quieten it down, keep the heat out to. Nice job though, hows it go? what's the body weight of it?
Re: dave V6 ek holden
wind the throttle stop screw in a bit when its hot. the insane sucking sound is the air rushing past the IAC stepper motor, by opening up the butterfly the IAC will close off a bit and reduce the sucking noise.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: dave V6 ek holden
looks good mate!
i dare say it would go alright, the old ek's weigh about 1100kg stock so fair bit less than the commodore the motor came out of!
i dare say it would go alright, the old ek's weigh about 1100kg stock so fair bit less than the commodore the motor came out of!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 100
- Joined: Sat Aug 21, 2010 3:12 pm
- cars: EK holden running vn v6
- Location: Geelong
Re: dave V6 ek holden
yeah Holden202, i havent pushed it too hard atm at the rear wheels rub on guards , raised the rear a little which seem to have resolve it .. mind you its a tired motor FREEbee
i have another 2 spares , im thinking of the ecotec to rebuild for it but that will mean so wiring mod for it to work and im not sure the modified vn ecu will work for it but for now i just seen to sort the tcc lock and enjoy her for a while.
sides i have 2 40,s chev trucks to do now .. ps Holden202 i notice your work on the red i have 2 timing wheel i had made for mine for the delco but never followed through i planned to bolt them on to harmonic balancer and run the std vn pic up for ignition and injector timing if you interested in them
i have another 2 spares , im thinking of the ecotec to rebuild for it but that will mean so wiring mod for it to work and im not sure the modified vn ecu will work for it but for now i just seen to sort the tcc lock and enjoy her for a while.
sides i have 2 40,s chev trucks to do now .. ps Holden202 i notice your work on the red i have 2 timing wheel i had made for mine for the delco but never followed through i planned to bolt them on to harmonic balancer and run the std vn pic up for ignition and injector timing if you interested in them
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: dave V6 ek holden
don't put an ecotec in it they'll crack the heads and you'll regret it! (only speaking from experience!)
thanks for the offer, but i'm pretty well sorted with my ignition stuff thanks!
thanks for the offer, but i'm pretty well sorted with my ignition stuff thanks!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 100
- Joined: Sat Aug 21, 2010 3:12 pm
- cars: EK holden running vn v6
- Location: Geelong
Re: dave V6 ek holden
ok re ecotec .. thought they where a seperior motor
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: dave V6 ek holden
out of 5 motors we tested the heads off only 2 heads had no cracks, they crack between the valves into water.
might just be the motors i had were being sold cause of this issue i dunno. but my mate also has an engine reconditioning shop and he sees them regularly come through the doors.
might just be the motors i had were being sold cause of this issue i dunno. but my mate also has an engine reconditioning shop and he sees them regularly come through the doors.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
-
- Posts: 100
- Joined: Sat Aug 21, 2010 3:12 pm
- cars: EK holden running vn v6
- Location: Geelong
Re: dave V6 ek holden
ok thanks for that Holden202 .. maybe ill just beef the buick up a little - cam heads and injector was my thought . on the spare motor