Vlad's rides thread
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Vlad's VP executive
i've only ever bought new (siemens deka's) and one set of second hand injectors off ebay.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- vlad01
- Posts: 7801
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Vlad's VP executive
can't find them new for under 350 bucks, thats the bosch no siemens ones came up on ebay.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Vlad's VP executive
for the LS1 injectors i think they are bosch. the dekas are 60 and 80lb
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- vlad01
- Posts: 7801
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Vlad's VP executive
so what actually are these injectors rated at? some list them as 24 lb @ 3 bar, some at 26 lb @ 3 bar and I even see 27 and 28 lb @ 3 bar?
Looked at some listing on the net for bosch injectors and they mostly show up as 26 @ 3 bar.
I m confused all have the same color and PN too.
meanwhile.
now my shopping list escalates to new bonnet and new front left panel. That too was hit with a grinder and heaps of bog. so this got me checking the main body. Thankfully that all checks out repair free
Also the front right panel is a genuine holden replacement, but its a s2 panel which has no mounting hole for the rubber bumper blocks that the bonnet sits on. in s2 they changed them to an off stand bolt with a rubber pad on it.
So I had a stashed panel for my vacationer from few years ago which happen to be the correct replacement so last night I started stripping the hideous multi layer paint job., metal underneath was almost perfect!
Looked at some listing on the net for bosch injectors and they mostly show up as 26 @ 3 bar.
I m confused all have the same color and PN too.
meanwhile.
now my shopping list escalates to new bonnet and new front left panel. That too was hit with a grinder and heaps of bog. so this got me checking the main body. Thankfully that all checks out repair free
Also the front right panel is a genuine holden replacement, but its a s2 panel which has no mounting hole for the rubber bumper blocks that the bonnet sits on. in s2 they changed them to an off stand bolt with a rubber pad on it.
So I had a stashed panel for my vacationer from few years ago which happen to be the correct replacement so last night I started stripping the hideous multi layer paint job., metal underneath was almost perfect!
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Vlad's VP executive
i'd try and find manufacturers specs for the part number, hard to trust anything else on the net.
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: Vlad's VP executive
The 931's are rated for 3.5bar, but being ev6's will handle different pressure's fine, so you can run them at 3 bar and get 24lb or 3.5bar and get 26lb
the bosch page is here, but the rating will spec @ 3bar but there rated for 3.5bar
http://www.bosch.com.au/content/languag ... ectors.pdf
dont know why some label them as 28lb
the bosch page is here, but the rating will spec @ 3bar but there rated for 3.5bar
http://www.bosch.com.au/content/languag ... ectors.pdf
dont know why some label them as 28lb
- vlad01
- Posts: 7801
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Vlad's VP executive
omg, got s pdf from bosch. says those are 187cc at 3 bar, or 17lb via conversion. wtf?
but at 3.5 bar would this be 24 lb?
http://www.bosch.com.au/content/languag ... ectors.pdf
but at 3.5 bar would this be 24 lb?
http://www.bosch.com.au/content/languag ... ectors.pdf
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: Vlad's VP executive
it's grams/min
- vlad01
- Posts: 7801
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Vlad's VP executive
oh haha so it is.
"whips out calculator"
24.735866 lb/h
so this would be around 26 lb at 3.5 bar?
"whips out calculator"
24.735866 lb/h
so this would be around 26 lb at 3.5 bar?
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: Vlad's VP executive
should convert to 201.978 Grams/Min for 3.5bar or 26.718 lb