my ride vt ecotec

Post Your Delco Powered Ride Here
vt3.8lt
Posts: 427
Joined: Tue Jul 30, 2013 6:13 pm
cars: Vt v6 turbo @ 8psi

Re: my ride vt ecotec

Post by vt3.8lt »

figured it out but the table only goes to 6375rpm will my pump cut out above that? or is there a way to get the table to go above that as my limiter is set to 6500rpm??
The answer is always... boost!
Dylan
Posts: 3355
Joined: Mon Aug 02, 2010 6:35 pm
cars: VR Commodore V8

Re: my ride vt ecotec

Post by Dylan »

Maybe try another value like coolant temp or TPS and boost
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: my ride vt ecotec

Post by VL400 »

vt3.8lt wrote:figured it out but the table only goes to 6375rpm will my pump cut out above that? or is there a way to get the table to go above that as my limiter is set to 6500rpm??
Bottom of page 6 of the advanced guide has your answer .. viewtopic.php?f=28&t=3051
vt3.8lt
Posts: 427
Joined: Tue Jul 30, 2013 6:13 pm
cars: Vt v6 turbo @ 8psi

Re: my ride vt ecotec

Post by vt3.8lt »

ok cool thanks for the reply if im reading this right then as long as its in the kpa range ive selected then the pump will still be on above the limits of the map???
The answer is always... boost!
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: my ride vt ecotec

Post by Holden202T »

outside the limits of the map it uses the last value in the map, so if that's on, it stays on still it come back into the map!

I have mine setup like this for second pump on with boost, I set it to come on over 105kpa and above 3200rpm (I use 2 step rev limiter on 3000rpm)
Post Reply