I'm going to take the pan off and remove the tv plunger and take the valve out to clean and check for damage hopefully I can buy some more time.vlad01 wrote:Comcal76 wrote:So I went out warmed up the car then I disconnected the TV cable and pulled on it a few times while it was running and I could here it working so I reset the adjustment as discribe in the book, it's not slamming in gear anymore so I took it for a drive and it's working that's strange
I had the same thing. worked for a bit after pumping the cable in and out few times and then go back to shit not long after. The longest I got it to work was about half a day.
Still at least I could drive it in the mean time. None of the previous VP autos I had could drive at all, they acted like they were in N
VP V6 Calais
Re: VP V6 Calais
Re: VP V6 Calais
Going to pull it apart and give it a clean also going to check the governor while I'm under there.delcowizzid wrote:Was probably stuck
Re: VP V6 Calais
Just a update guy's I've decided to stick with my transmission and I'm doing a full rebuild, when I pulled the transmission apart the tv valve was stuck which burned out the 3-4 clutches and steel's and the torque converter is fucked from the heat, I have already installed the transgo shift kit into the valve body and drilled the separator plate here are some pictures of how the transmission sits now.
Last edited by Comcal76 on Wed Jan 15, 2020 7:45 am, edited 1 time in total.
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: VP V6 Calais
coming along nicely, should be a whole different box after that!
No matter what the question is, the answer is always more horsepower! ![turbo :turbo:](./images/smilies/TurboSmiley.gif)
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
![turbo :turbo:](./images/smilies/TurboSmiley.gif)
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Re: VP V6 Calais
Haven't been on for a while so here's the latest i finished rebuilding the transmission and it's back in the car, haven't tested it yet as I'm still waiting for a pressure gauge to make sure it's running at the correct pressures and oil temperature gauge to turn up.
Parts list
High energy clutches for low/reverse, forward, and reverse. Raybestos zpak for 3-4 clutch. Wide band. Reverse drum. Corvette servo. Accumulator pistons. Hughes heavy duty low/reverse sprag and 29 element input sprag. Bearings. Beast sunshell. Rubber moulded piston upgrade. All new bushes. 3rd accumulator capsule. Sonnax check valve. Shift kit. Trans cooler.
I hope this thing works haha.
Parts list
High energy clutches for low/reverse, forward, and reverse. Raybestos zpak for 3-4 clutch. Wide band. Reverse drum. Corvette servo. Accumulator pistons. Hughes heavy duty low/reverse sprag and 29 element input sprag. Bearings. Beast sunshell. Rubber moulded piston upgrade. All new bushes. 3rd accumulator capsule. Sonnax check valve. Shift kit. Trans cooler.
I hope this thing works haha.
- vlad01
- Posts: 7795
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: VP V6 Calais
I reckon! my mate did a similar upgrade on his 4l60e and it all worked out great. Scary moment really, given how many parts and complexity to an auto
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
-
- Posts: 3424
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: VP V6 Calais
I think our VX needs that check valve. I think it's easy to fit?
Re: VP V6 Calais
I've already pulled apart my spare 4l60e for my ute to rebuild ![Laughing :lol:](./images/smilies/icon_lol.gif)
![Laughing :lol:](./images/smilies/icon_lol.gif)
Re: VP V6 Calais
Very easy to fitimmortality wrote:I think our VX needs that check valve. I think it's easy to fit?
- psyolent
- Posts: 1575
- Joined: Tue Apr 26, 2011 9:52 pm
- cars: VN S Pack
VX Berlina Series 1
XP Falcon ex Geelong Taxi
RN105 V8 Hilux
VT Series 1 Track Car
Re: VP V6 Calais
man you have to have a level of commitment and clear head to rebuild an auto good work mate.
Cheers,
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.
Greg aka Sir Burnie Tanington
VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.