Big G's VL Turbo
Big G's VL Turbo
Some who know me, know that I've had this for a while. I have been tinkering and improving it since purchase about 4 years ago. I have recently added a BOV and replaced all the daggy intake hoses with quality black ones.
Anyhow, I'm up to the point of tuning it, it is fitted with an old Wolf 3D EMS with which it never ran well, idle was always fat as hell and chugged at low throttle. The old owner shelled out tonnes of money for work that I can only describe as substandard, including the tune... I have attached it for anyone who's interested, I'd love any comments on it.
Edit : the file type isn't allowed by the forum (.wmf) any ideas moderators?
Anyhow, I'm up to the point of tuning it, it is fitted with an old Wolf 3D EMS with which it never ran well, idle was always fat as hell and chugged at low throttle. The old owner shelled out tonnes of money for work that I can only describe as substandard, including the tune... I have attached it for anyone who's interested, I'd love any comments on it.
Edit : the file type isn't allowed by the forum (.wmf) any ideas moderators?
- Attachments
-
- 496A5852-7D85-4F17-A7A3-767B3B85EA42.jpeg (408.98 KiB) Viewed 5417 times
According to chemistry, alcohol is a solution...
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Big G's VL Turbo
Zip it
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: Big G's VL Turbo
Finally got the fuel rail back from the anodiziers today (3months later...) and fitted it along with these lovely ID1300 injectors, got some tuning to do now
According to chemistry, alcohol is a solution...
Re: Big G's VL Turbo
Hey what size are the chaser rims ? cheers
Re: Big G's VL Turbo
G'day, they're 17x8's from BCI wheels in Geelong.
According to chemistry, alcohol is a solution...
Re: Big G's VL Turbo
Biggvl wrote:G'day, they're 17x8's from BCI wheels in Geelong.
Nice wheels. Ever seen the bigger one's from the USA? Either 19 or 20 inch they ran them on the police car over there in think it was actually a VE statesman?
Re: Big G's VL Turbo
Sorry only 18". Not real pretty either they've lost the proportion a fair bit.
https://www.ebay.com/itm/Wheel-18x8-Ste ... %3ACaprice
https://www.ebay.com/itm/Wheel-18x8-Ste ... %3ACaprice
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Big G's VL Turbo
just be careful, if they are a "VE" type rim they will have the wrong diameter hole in the centre for earlier models!
I didn't even realise the chasers in the above pic was larger than 15 inch lol!
I didn't even realise the chasers in the above pic was larger than 15 inch lol!
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread