What to do with an old flogged out VZ SV6 Ute

Post Your Delco Powered Ride Here
User avatar
Posts: 9724
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: What to do with an old flogged out VZ SV6 Ute

Postby Holden202T » Sat Mar 23, 2019 8:26 am

more than anything its aim is to see how a rear mount turbo works, and also how an alloytec responds to a turbo.

if it doesn't explode it might end up out at Gunnedah doing some 1/8th racing, then i'll probably pull the motor and box (and wiring) and a few other parts and ditch the shell.

oh and at least one shed skid with the turbo .... purely to compare non-turbo v's turbo ..... its not like im a hoon or anything :) :think:

User avatar
Posts: 1507
Joined: Tue Apr 26, 2011 9:52 pm

Re: What to do with an old flogged out VZ SV6 Ute

Postby psyolent » Tue Apr 02, 2019 7:11 am

im using pvc pipe and no intercooler :P

do this and you win the internet more than bigg_vl

shed skid mandatory.
Cheers,
Greg aka Sir Burnie Tanington

VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.

User avatar
Posts: 2016
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: What to do with an old flogged out VZ SV6 Ute

Postby Biggvl » Tue Apr 02, 2019 7:24 am

I've got a life ban from shed skids, in my shed anyway.... ;)
According to chemistry, alcohol is a solution...

User avatar
Posts: 1507
Joined: Tue Apr 26, 2011 9:52 pm

Re: What to do with an old flogged out VZ SV6 Ute

Postby psyolent » Tue Apr 02, 2019 7:57 am

um.....you have more than one shed ;) ;) :D :D :D
Cheers,
Greg aka Sir Burnie Tanington

VX1 Berlina V6, VT1 Berlina V6 (Track), VN1 S V6, Hilux RN105 GMV8, Ford XP 170.

User avatar
Posts: 9724
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: What to do with an old flogged out VZ SV6 Ute

Postby Holden202T » Tue Apr 02, 2019 8:15 am

you know there will be shed skids ;)

User avatar
Posts: 9724
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: What to do with an old flogged out VZ SV6 Ute

Postby Holden202T » Tue Jul 09, 2019 4:24 pm

Not a massive update, but long story short, the injectors in the ute with the adaptors have been leaking, and i just happened to see these on facebook market place and couldn't resist:

1. they are the right length
2. they are the right connector
3. they are 70lb!
4. they are cheap!!

70lbinjectors.png
70lbinjectors.png (490.66 KiB) Viewed 141 times

so they were installed in the ute last night and tune adjusted for the size difference and shes all working nicely!

i did a pretty dodgy skid to load the engine up and get a log, its pretty much a black video with some smoke wafting through the headlights of another vehicle!

anyways its still a low priority project in my life at the moment but at least now it wont catch on fire and probably has the capacity in the injectors for E85 and 10psi maybe ? :twisted:

User avatar
Posts: 2016
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: What to do with an old flogged out VZ SV6 Ute

Postby Biggvl » Tue Jul 09, 2019 6:21 pm

I just re-read this from the start, that oil scavenger pump is exactly the same type I have been using on my VE twin turbo. I have had nothing but drama with them, they don’t seem to cope long term with the oil temp. The seal between the pump and the electric motor dies, floods the motor with oil and burns everything...
Another thing to consider is the effect of blow-by on the returning oil to the crank case and its ability to stall the pump seeing it has no bypass valve.
According to chemistry, alcohol is a solution...

User avatar
Posts: 2016
Joined: Fri Mar 14, 2014 8:37 pm
Location: Bacchus Marsh, Vic

Re: What to do with an old flogged out VZ SV6 Ute

Postby Biggvl » Tue Jul 09, 2019 6:25 pm

E3542CA7-8A84-48E4-A630-E73CCB053E71.jpeg
6A1FD0AF-99E8-4AC7-BA4A-86B4277D3003.jpeg
D80C7288-8216-429C-988F-050A45A3B131.jpeg
9A7329C3-C6C6-4E3C-BE70-38C4BC7665C5.jpeg
According to chemistry, alcohol is a solution...

User avatar
Posts: 9724
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: What to do with an old flogged out VZ SV6 Ute

Postby Holden202T » Tue Jul 09, 2019 8:43 pm

wow those gears arnt loving it!

hopefully my pump lasts longer than i expect the trans to haha!

Posts: 698
Joined: Tue Apr 21, 2015 1:42 pm

Re: What to do with an old flogged out VZ SV6 Ute

Postby heff0018 » Wed Jul 10, 2019 1:59 pm

Holden202T wrote:Not a massive update, but long story short, the injectors in the ute with the adaptors have been leaking, and i just happened to see these on facebook market place and couldn't resist:

1. they are the right length
2. they are the right connector
3. they are 70lb!
4. they are cheap!!

70lbinjectors.png

so they were installed in the ute last night and tune adjusted for the size difference and shes all working nicely!

i did a pretty dodgy skid to load the engine up and get a log, its pretty much a black video with some smoke wafting through the headlights of another vehicle!

anyways its still a low priority project in my life at the moment but at least now it wont catch on fire and probably has the capacity in the injectors for E85 and 10psi maybe ? :twisted:


Great price!

PreviousNext

Return to Members Rides

Who is online

Users browsing this forum: No registered users and 4 guests