Ants SR20DET '75 Gemini track car
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Ants SR20DET '75 Gemini track car
whats the deal, you have to remove the cams to get at the head bolts ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Ants SR20DET '75 Gemini track car
Yeah they're directly under and inline with the cams.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: Ants SR20DET '75 Gemini track car
that's not cool! makes a simple job so much harder, I guess at least the motor is powerful to make up for that hehe
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Ants SR20DET '75 Gemini track car
I guess normally if your touching the head bolts your taking the head off so need cams out anyway.... and it turned out not too bad just needed to mark the chain and tie it back so it didnt fall off at the the bottom end, pull the tensioner out to provide enough slack when we needed it and the re-alignment of cas was easy too once we realised my marking location was useless. But next time I wouldnt even mark it, there are 2 notches, and you set the engine to TDC then slide it in aligning off one, and it moves as the teeth mesh so the mark is on the second.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: Ants SR20DET '75 Gemini track car
Why you no cam it lol
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Ants SR20DET '75 Gemini track car
Despite Holden202Ts signature - way too much power already!
Needs more traction and more steering first. Launching and stopping are fine, so long as its in a straight line. Haha I can feel you thinking "drag strip" but its a circuit car.
Needs more traction and more steering first. Launching and stopping are fine, so long as its in a straight line. Haha I can feel you thinking "drag strip" but its a circuit car.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
- vlad01
- Posts: 7801
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: Ants SR20DET '75 Gemini track car
I agree, circuit and hill climb ftw!
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Ants SR20DET '75 Gemini track car
I managed to get out to "The Bend" in this car yesterday, and have a lot of fun on the international circuit. Its fantastic to have a great circuit like this operational in SA now!
[youtube]https://www.youtube.com/watch?v=mqulsgT6mvA[/youtube]
https://www.youtube.com/watch?v=mqulsgT6mvA
[youtube]https://www.youtube.com/watch?v=mqulsgT6mvA[/youtube]
https://www.youtube.com/watch?v=mqulsgT6mvA
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Re: Ants SR20DET '75 Gemini track car
Hell yeah
Dam those tyres where screaming in agony
Why is your phone zip tied to the dash??
Dam those tyres where screaming in agony
Why is your phone zip tied to the dash??
According to chemistry, alcohol is a solution...
- antus
- Site Admin
- Posts: 8252
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: Ants SR20DET '75 Gemini track car
good spot to receive gps data for race chrono pro, of course
That pair of cable ties have been with me for about 3 track days now. There is a slot at the back of the dash it loops through and a v shape on the front of the dash so I can slide the ties across to release the phone and slide it back with the phone in place to lock it in. Works really well.
That pair of cable ties have been with me for about 3 track days now. There is a slot at the back of the dash it loops through and a v shape on the front of the dash so I can slide the ties across to release the phone and slide it back with the phone in place to lock it in. Works really well.
- Attachments
-
- international_pb_2.33.18.png (57.72 KiB) Viewed 5479 times
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396