The1's Daily Daily Barina XC

Post Your Delco Powered Ride Here
julespatch
Posts: 159
Joined: Fri Aug 25, 2017 5:28 pm
cars: liberty gen 5
Location: Adelaide

Re: The1's Daily Daily Barina XC

Post by julespatch »

carprog reads and writes the security section of the barina ecus.
kess writes the maps. you can go from 2.1 to 2.5 and back.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Daily Daily Barina XC

Post by The1 »

yeh that's it, i think the barina ones are ME7 and VZ ME9.
julespatch
Posts: 159
Joined: Fri Aug 25, 2017 5:28 pm
cars: liberty gen 5
Location: Adelaide

Re: The1's Daily Daily Barina XC

Post by julespatch »

Hmm i wonder if i can go from a TS into a QD computer.
I tried to put a QD one in a TS car. Starts and runs fine but ended up having a couple of codes that weren't there before. I'm assuming the software is just different. TIS wont allow it but MPPS probably will.
I'll try it out. The TS one cost me a small fortune just to get out of trouble but I haven't used it yet so I might see if it works. Got 2 x QD's in the car.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Daily Daily Barina XC

Post by The1 »

i havn't done a swap yet on my barina, the other ecu's i have here i dont know the immo code for yet.
julespatch
Posts: 159
Joined: Fri Aug 25, 2017 5:28 pm
cars: liberty gen 5
Location: Adelaide

Re: The1's Daily Daily Barina XC

Post by julespatch »

FVDI reads and resets the immo code without the rest of the car :)
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Daily Daily Barina XC

Post by The1 »

immo from ecu? most pull immo code from cluster.
julespatch
Posts: 159
Joined: Fri Aug 25, 2017 5:28 pm
cars: liberty gen 5
Location: Adelaide

Re: The1's Daily Daily Barina XC

Post by julespatch »

Yep, ecu.
Attachments
20200710_115008.jpg
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Daily Daily Barina XC

Post by The1 »

id be interested to see where it's reading it from and what mode it's using, have you got something to log it doing the request?

Mode 23 reading flash doesn't get anything, ive gone through all the 21 and 1A PID requests and found nothing so it must be reading it via another mode or getting it from ram.
julespatch
Posts: 159
Joined: Fri Aug 25, 2017 5:28 pm
cars: liberty gen 5
Location: Adelaide

Re: The1's Daily Daily Barina XC

Post by julespatch »

nah thats a bit out of my depth. if you explain to me how to do it i'll give it a go.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Daily Daily Barina XC

Post by The1 »

you'l need a splitter cable so you can connect 2 devices to the bus at the same time.

The other device needs to support kline KWP2000 for this ECU and software that can monitor the bus, for kline i use the passthru logger program with my vcxnano cable.
Post Reply