Hi used ecm2001 for my astra 2000 and looked maps and it looks little wierd for me, is that right?
https://www.dropbox.com/s/mholzeaefyope ... %20map.jpg
driver: A20_S70A.DRV
Siemens
Opel Sintec 70
ca072082.DAT
Cod prod: 6586035326
Num HW: S98002
Cod OMO: X20XE
Num SW: V90520859
------------------------------
Cks: 7767
Size: 114688 = 0x1C000
regards ... mika
Opel Astra 2.0 136CV X20XE Opel Sintec 70
Opel Astra 2.0 136CV X20XE Opel Sintec 70
- Attachments
-
- vakio.zip
- (59.95 KiB) Downloaded 390 times
-
- Posts: 2883
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: Opel Astra 2.0 136CV X20XE Opel Sintec 70
I have no idea how to map or where to start, but seeing no one else has replied here's my 2 cents worth.
Normally factory VE tables don't go to far over 1.00, but could be wrong!
If it helps I've attached a sintec astra X18XE Auto file, was yours auto or manual & what month/year?
Normally factory VE tables don't go to far over 1.00, but could be wrong!
If it helps I've attached a sintec astra X18XE Auto file, was yours auto or manual & what month/year?
- Attachments
-
- 2-00 TS Astra X18XE Auto simtec70.bin
- (112 KiB) Downloaded 372 times
Re: Opel Astra 2.0 136CV X20XE Opel Sintec 70
Those are raw values, looks similar to the Motronic method of fuel calculation where stoich fuel delivery is calculated first, then the fuel table is used as a multiplier with 1:1 being 128.VX L67 Getrag wrote: Normally factory VE tables don't go to far over 1.00, but could be wrong!
Re: Opel Astra 2.0 136CV X20XE Opel Sintec 70
injection are 00D7F8 16x12
maybe cold start 00E100 16x12
spark 00E3FC 16x12
i think maybe it`s only inverted...
so tourist still
festy: if i undenstand right downrange are stoich when lambda is warm then a/f is ok, and uprange coming in table.
maybe cold start 00E100 16x12
spark 00E3FC 16x12
i think maybe it`s only inverted...
so tourist still
festy: if i undenstand right downrange are stoich when lambda is warm then a/f is ok, and uprange coming in table.