Opel Astra 2.0 136CV X20XE Opel Sintec 70

European GM ECUs and PCMs
Post Reply
ruot0
Posts: 4
Joined: Mon Apr 21, 2014 7:54 pm

Opel Astra 2.0 136CV X20XE Opel Sintec 70

Post by ruot0 »

Hi used ecm2001 for my astra 2000 and looked maps and it looks little wierd for me, is that right?
https://www.dropbox.com/s/mholzeaefyope ... %20map.jpg

driver: A20_S70A.DRV
Siemens
Opel Sintec 70
ca072082.DAT
Cod prod: 6586035326
Num HW: S98002
Cod OMO: X20XE
Num SW: V90520859
------------------------------
Cks: 7767
Size: 114688 = 0x1C000

regards ... mika
Attachments
vakio.zip
(59.95 KiB) Downloaded 387 times
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Opel Astra 2.0 136CV X20XE Opel Sintec 70

Post by VX L67 Getrag »

I have no idea how to map or where to start, but seeing no one else has replied here's my 2 cents worth.

Normally factory VE tables don't go to far over 1.00, but could be wrong!

If it helps I've attached a sintec astra X18XE Auto file, was yours auto or manual & what month/year?
Attachments
2-00 TS Astra X18XE Auto simtec70.bin
(112 KiB) Downloaded 370 times
User avatar
festy
Posts: 1039
Joined: Sat Apr 30, 2011 6:27 pm
cars: Alfa Romeos
Location: Narellan, NSW

Re: Opel Astra 2.0 136CV X20XE Opel Sintec 70

Post by festy »

VX L67 Getrag wrote: Normally factory VE tables don't go to far over 1.00, but could be wrong!
Those are raw values, looks similar to the Motronic method of fuel calculation where stoich fuel delivery is calculated first, then the fuel table is used as a multiplier with 1:1 being 128.
ruot0
Posts: 4
Joined: Mon Apr 21, 2014 7:54 pm

Re: Opel Astra 2.0 136CV X20XE Opel Sintec 70

Post by ruot0 »

injection are 00D7F8 16x12
maybe cold start 00E100 16x12
spark 00E3FC 16x12

i think maybe it`s only inverted...
so tourist still :typist:

festy: if i undenstand right downrange are stoich when lambda is warm then a/f is ok, and uprange coming in table.
Post Reply