Z16SE engine maps

European GM ECUs and PCMs
Posts: 2464
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Z16SE engine maps

Postby VX L67 Getrag » Fri Mar 18, 2016 6:56 pm

Did you flash with KWP & did you use the same cal type?

If so then would be the file you flashed, need to see the file you flashed & what you used to edit!

Posts: 17
Joined: Sat Feb 27, 2016 8:19 pm
Location: Sibiu , Romania

Re: Z16SE engine maps

Postby marius popescu » Fri Mar 18, 2016 7:16 pm

This is the "tuned" file . I don't know what he used , but I guess he used Winols . I don't know what this means "did you use the same cal type" :( .
Thank you !
Attachments
Z16SE FARA EGR tuning.bin
(256 KiB) Downloaded 203 times

Posts: 2464
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Z16SE engine maps

Postby VX L67 Getrag » Fri Mar 18, 2016 9:26 pm

Well theres changes to 1 of the 95Ron spark maps I did & must go 1 byte longer than I had, then it looks like it must be a fuel table adjustment after that, but what the zero out changes are 3700 & beyond is a bit of a worry.

I can't see where the checksum changes are so that could be an issue???

Posts: 17
Joined: Sat Feb 27, 2016 8:19 pm
Location: Sibiu , Romania

Re: Z16SE engine maps

Postby marius popescu » Tue Mar 22, 2016 3:55 am

Using a Galletto 54 , my ECU is back to life . There was no need for hacking :)

Posts: 2464
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Z16SE engine maps

Postby VX L67 Getrag » Tue Mar 22, 2016 9:10 am

With the modified tune or did you go back to the original?

Does the galleto software allow you to use the standard KWP2000 dongle?

Posts: 17
Joined: Sat Feb 27, 2016 8:19 pm
Location: Sibiu , Romania

Re: Z16SE engine maps

Postby marius popescu » Tue Mar 22, 2016 5:14 pm

The ECU is back to original . If you mean if galletto software can be used with KWP2000 hardware interface the answer is no , it can't .
Now I have no idea what to do next , I don't trust my tools to flash again the ECU . ( that galletto 54 isn't mine , someone else has it)

Posts: 2464
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Z16SE engine maps

Postby VX L67 Getrag » Tue Mar 22, 2016 6:44 pm

Did you speak to who made your other adjustments as to what they used & whether it had the corrections for checksums?

Does the Galleto software have any editing sort of software?

I "THINK" the KessV2 may support opel, but I think the ECM titanium is what is used to adjust files?

Posts: 17
Joined: Sat Feb 27, 2016 8:19 pm
Location: Sibiu , Romania

Re: Z16SE engine maps

Postby marius popescu » Tue Mar 22, 2016 6:57 pm

Galletto software can only read/write the flash content . Who made the adjustments didn't make any checksum correction . In this moment I don't trust what he did , so I will not attempt to flash again that file . And I don't trust anymore Galletto 1260 . Maybe I did something wrong when I tried to reflash using it , I don't want to brake again the ECU ( the owner of Galletto v54 lives in a different town)

Previous

Return to Euro GM ECUs

Who is online

Users browsing this forum: No registered users and 2 guests