Z16SE engine maps

European GM ECUs and PCMs
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Z16SE engine maps

Post by VX L67 Getrag »

Did you flash with KWP & did you use the same cal type?

If so then would be the file you flashed, need to see the file you flashed & what you used to edit!
marius popescu
Posts: 17
Joined: Sat Feb 27, 2016 8:19 pm
cars: Opel Astra G
Z16SE
2001
Location: Sibiu , Romania
Contact:

Re: Z16SE engine maps

Post by marius popescu »

This is the "tuned" file . I don't know what he used , but I guess he used Winols . I don't know what this means "did you use the same cal type" :( .
Thank you !
Attachments
Z16SE FARA EGR tuning.bin
(256 KiB) Downloaded 529 times
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Z16SE engine maps

Post by VX L67 Getrag »

Well theres changes to 1 of the 95Ron spark maps I did & must go 1 byte longer than I had, then it looks like it must be a fuel table adjustment after that, but what the zero out changes are 3700 & beyond is a bit of a worry.

I can't see where the checksum changes are so that could be an issue???
marius popescu
Posts: 17
Joined: Sat Feb 27, 2016 8:19 pm
cars: Opel Astra G
Z16SE
2001
Location: Sibiu , Romania
Contact:

Re: Z16SE engine maps

Post by marius popescu »

Using a Galletto 54 , my ECU is back to life . There was no need for hacking :)
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Z16SE engine maps

Post by VX L67 Getrag »

With the modified tune or did you go back to the original?

Does the galleto software allow you to use the standard KWP2000 dongle?
marius popescu
Posts: 17
Joined: Sat Feb 27, 2016 8:19 pm
cars: Opel Astra G
Z16SE
2001
Location: Sibiu , Romania
Contact:

Re: Z16SE engine maps

Post by marius popescu »

The ECU is back to original . If you mean if galletto software can be used with KWP2000 hardware interface the answer is no , it can't .
Now I have no idea what to do next , I don't trust my tools to flash again the ECU . ( that galletto 54 isn't mine , someone else has it)
VX L67 Getrag
Posts: 2877
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria
Contact:

Re: Z16SE engine maps

Post by VX L67 Getrag »

Did you speak to who made your other adjustments as to what they used & whether it had the corrections for checksums?

Does the Galleto software have any editing sort of software?

I "THINK" the KessV2 may support opel, but I think the ECM titanium is what is used to adjust files?
marius popescu
Posts: 17
Joined: Sat Feb 27, 2016 8:19 pm
cars: Opel Astra G
Z16SE
2001
Location: Sibiu , Romania
Contact:

Re: Z16SE engine maps

Post by marius popescu »

Galletto software can only read/write the flash content . Who made the adjustments didn't make any checksum correction . In this moment I don't trust what he did , so I will not attempt to flash again that file . And I don't trust anymore Galletto 1260 . Maybe I did something wrong when I tried to reflash using it , I don't want to brake again the ECU ( the owner of Galletto v54 lives in a different town)
Post Reply