Z16SE engine maps

European GM ECUs and PCMs
Posts: 1245
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Re: Z16SE engine maps

Postby Charlescrown » Tue Mar 01, 2016 7:46 am

Can you please check if it is HSFI 2.1. That number is not on my large list of Delco Multech ECU's fitted to the Astra. It comes up as Fiat.

Posts: 17
Joined: Sat Feb 27, 2016 8:19 pm
Location: Sibiu , Romania

Re: Z16SE engine maps

Postby marius popescu » Wed Mar 02, 2016 4:21 am

Yes , now I am sure .
About my ECU , it is a long story : my car's ECU had a problem , I had to replace it because we could not fix it . Because the EGR was off , my wish was to keep it so . The person that sold me the "new" ECU has programmed this one with the old flash content . He confirmed me the ECU type is HSFI 2.1 .
Thank you !

Posts: 1245
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Re: Z16SE engine maps

Postby Charlescrown » Wed Mar 02, 2016 4:53 pm

At this stage I cannot help. I have looked at the file with many and nothing lines up and makes sense. I know very little so unless you can give me a lot more detail like the original ECU number I now bow out. Good luck.

Posts: 17
Joined: Sat Feb 27, 2016 8:19 pm
Location: Sibiu , Romania

Re: Z16SE engine maps

Postby marius popescu » Thu Mar 03, 2016 3:39 am

I hope this picture will help . Thank you !
Attachments
IMG_20160302_193149.jpg

Posts: 2464
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Z16SE engine maps

Postby VX L67 Getrag » Thu Mar 03, 2016 8:49 am

I just had a look & is very similar to the maps mentioned in this thread...
viewtopic.php?f=17&t=3497&p=55489&hilit=multec#p55489

Posts: 17
Joined: Sat Feb 27, 2016 8:19 pm
Location: Sibiu , Romania

Re: Z16SE engine maps

Postby marius popescu » Thu Mar 03, 2016 5:40 pm

I know that topic . That map is for Z16XE . I compared the flash contents , it is very different from mine . I use WinOls , it has this option to compare 2 files . I don't know what tool You use .

Posts: 2464
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Z16SE engine maps

Postby VX L67 Getrag » Thu Mar 03, 2016 6:12 pm

This was just a VERY quick start I did on your bin, only really the AFR section is right so far!
Attachments
z16se(start only).xdf
(11.49 KiB) Downloaded 178 times

Posts: 17
Joined: Sat Feb 27, 2016 8:19 pm
Location: Sibiu , Romania

Re: Z16SE engine maps

Postby marius popescu » Thu Mar 03, 2016 8:24 pm

Thank you ! I am waiting for more . :)

Posts: 2464
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Z16SE engine maps

Postby VX L67 Getrag » Thu Mar 03, 2016 9:39 pm

Without knowing winOLS I'm just looking in another bin that had a started XDF & trying to find similar areas, so I really are just guessing!

Posts: 2464
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Z16SE engine maps

Postby VX L67 Getrag » Fri Mar 04, 2016 2:36 pm

Well I've managed to stumble across WinOLS but it doesn't look like it supports the maps for that controller, so still really left to guessing without further info...

PreviousNext

Return to Euro GM ECUs

Who is online

Users browsing this forum: No registered users and 1 guest