Adapting a Delco SP EFI to Carb'd Sierra SJ410

European GM ECUs and PCMs
Post Reply
Rhysu
Posts: 1
Joined: Thu Sep 15, 2016 2:08 pm
cars: 1989 Toyota Celsior
1984 Suzuki SJ410
1994 Suzuki SJ413
2013 Kawasaki Ninja 300

Adapting a Delco SP EFI to Carb'd Sierra SJ410

Post by Rhysu »

Hey guys, totally new here.
I own a 84 Suzuki Sierra with a F10A 1 litre engine and the carb is the worlds worst and most unreliable.. Anyway, I got my hands on the ecu, loom and throttle body (i have the complete car) to do an EFI conversion to my Sierra. I was wondering if anyone had information, pinouts or anything in regards to this Delco. Part # 16204749 (D95011)

It's from a 96 Barina (opel corsa) with the C14NZ. So far I have found next to nothing useful in terms of wiring diagrams. My best reference being the car it came from. I have fuel pump wires sussed but thats about it.. Anyone ever played with this delco before or have a barina or corsa b electrical diagram?
slewinson
Posts: 224
Joined: Wed Oct 08, 2014 11:08 am
cars: Barina SB C14SE
Lexus RX350
VW Golf Mk5 TDI DSG

Re: Adapting a Delco SP EFI to Carb'd Sierra SJ410

Post by slewinson »

I had a slightly different Barina with the C14SE multipoint engine, and there is extremely little information around on the EFI systems. Not what I would choose for a conversion.

Simon
Post Reply