16190674 Daewoo ECM

European GM ECUs and PCMs
User avatar
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
Location: Perth, WA

16190674 Daewoo ECM

Postby VL400 » Thu Jun 17, 2010 12:39 pm

Picked this one up this morning. While its from an aussie delivered 1996 Daewoo Cielo its not really the run of the mill ECM found around here and seem more common in Europe. It has no memcal or flash memory so looks like the processor that GM used is a variant with internal memory - hence the pads around the processor. I am yet to fire it up on the bench but will do when i work out the pinouts. It uses the same plugs as an '808 and some wires look like they are the same function as an '808 but are a different colour to the GMH wiring.

The code base for this ECM is BSKN. If anyone has some info about this ECM please post it here :thumbup:


Here are some pics...

16190674_front_sm.jpg
16190674_front_sm.jpg (213.14 KiB) Viewed 1835 times


16190674_rear_sm.jpg
16190674_rear_sm.jpg (247.96 KiB) Viewed 1835 times



Dec_head has also posted up a pic of one here .. http://delcohacking.net/forums/viewtopic.php?f=13&t=441

Posts: 16
Joined: Mon Jan 11, 2010 7:57 am

Re: 16190674 Daewoo ECM

Postby delboy » Fri Jun 18, 2010 7:58 am

I have lots similar ecus but have not played with them, here, it seems none with the black plug has external eprom or immobilizer function. I'm sort of a noob youd need to be more specific, I have some wiring diagrams/pin outs for possibly the same but I dont know where you guys get the numbers eg '808' from or 0$2 etc. Here as a general rule the purple plug, blue plug and longer type casing with red and white plug have the 27c256 'blue'.

Posts: 84
Joined: Mon May 11, 2009 4:00 pm

Re: 16190674 Daewoo ECM

Postby UCMatt » Fri Jun 18, 2010 8:16 am

I recently looked at a number of different Daewoo ECU's at the wreckers. Some of them had removable eproms, others did not.
Looking at the wiring diagram's, particularly the models using the family 2 (camira style) engine, they are almost pin for pin the same as an 808. :thumbup:
None of the models I looked at appeared to support knock control. :thumbdown:
I did not bother progressing with them due to other priorities, but I will see if I still have the wiring diagrams floating around somewhere.

Posts: 15
Joined: Thu Apr 29, 2010 10:48 pm
Location: Ukraine, Vinnitsa

Re: 16190674 Daewoo ECM

Postby malser » Fri Jun 18, 2010 3:12 pm

Obviously, the firmware is located in the processor and have it read. I have the original bin file. If necessary, I can lay out.

Posts: 16
Joined: Mon Jan 11, 2010 7:57 am

Re: 16190674 Daewoo ECM

Postby delboy » Fri Jun 18, 2010 7:32 pm

These can be mapped if we have a way to read/write the processor? It is hco5? I read they where otp?

Posts: 39
Joined: Sat Jun 12, 2010 2:28 am
Location: Bulgaria

Re: 16190674 Daewoo ECM

Postby ivanovbg » Sat Jun 19, 2010 1:56 am

if 16 walwe -B7-M,D8-B
A12,B10,C12,C13,D1 -0volta
B1,C16 -+12 volta
C4 -ignition
If knowledge does not help, try a power (hammer)

User avatar
Posts: 1020
Joined: Sat Apr 30, 2011 6:27 pm
Location: Narellan, NSW

Re: 16190674 Daewoo ECM

Postby festy » Tue Apr 22, 2014 8:11 pm

I got a similar unit today, mixed up with some 808s.
Mine's a 16204739 / D95014 BPDD - apparently from a '95-96 Opel Corsa B 1.2 which would be a Holden Barina here right?
This one has an immobiliser (serial eeprom) but otherwise looks the same as VL400's.
If I can find a wiring diagram I'll see if I can get it talking...

PCB.jpg
PCB.jpg (126.26 KiB) Viewed 4827 times


label.jpg
label.jpg (78.89 KiB) Viewed 4827 times

I'm guessing the immobiliser codes are in here:
immo.jpg
immo.jpg (76.28 KiB) Viewed 4827 times


Not the neatest component alignment I've seen:
align1.jpg
align1.jpg (77.95 KiB) Viewed 4827 times

Posts: 1149
Joined: Sun Mar 15, 2009 10:20 am
Location: Geelong, VIC

Re: 16190674 Daewoo ECM

Postby yoda69 » Tue Apr 22, 2014 9:18 pm

16204739 looks like it is for the C12NZ (1.2 Litre Barina and Combo 1994-7), these had an Octane plug for 91/95RON in the engine bay, so probably have 2 spark maps.
Quick look has wiring similar to 808, with exception that Octane plug goes to C12 which is the MAT sensor on an 808 and the immobiliser coming in on A10 which is VSS on an 808.
Corsa-B.pdf
(38.18 KiB) Downloaded 354 times

User avatar
Posts: 1020
Joined: Sat Apr 30, 2011 6:27 pm
Location: Narellan, NSW

Re: 16190674 Daewoo ECM

Postby festy » Tue Apr 22, 2014 9:27 pm

Thanks for that, I'll fire it up when I get some free time and see if I can get the bin out.

Posts: 3195
Joined: Mon Aug 02, 2010 6:35 pm

Re: 16190674 Daewoo ECM

Postby Dylan » Tue Apr 22, 2014 9:38 pm

No casting any judgment but can I ask why the interest? Just expanding knowledge or looking for a particular feature
Or a replacement 808 as I assume they will run out or all die one day.

Next

Return to Euro GM ECUs

Who is online

Users browsing this forum: No registered users and 1 guest