16190674 Daewoo ECM

European GM ECUs and PCMs
slewinson
Posts: 224
Joined: Wed Oct 08, 2014 11:08 am
cars: Barina SB C14SE
Lexus RX350
VW Golf Mk5 TDI DSG

Re: 16190674 Daewoo ECM

Post by slewinson »

Another random discovery. This PCB looks almost identical to the barina ECU that I am looking to disassemble.
image.jpg
image.jpg (2.13 MiB) Viewed 10798 times
http://pcmhacking.net/forums/viewtopic.php?f=26&t=3821

Does anybody have information on the custom ICs?
Charlescrown
Posts: 1831
Joined: Sat Aug 06, 2011 7:58 am
cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes
Location: Padstow NSW

Re: 16190674 Daewoo ECM

Post by Charlescrown »

Has anyone made any progress with this ECU?? And does it have knock control??
slewinson
Posts: 224
Joined: Wed Oct 08, 2014 11:08 am
cars: Barina SB C14SE
Lexus RX350
VW Golf Mk5 TDI DSG

Re: 16190674 Daewoo ECM

Post by slewinson »

The barina ECU running CBXD does not have any knock control.

I will be working further on this when time permits.

Simon
User avatar
barana
Posts: 98
Joined: Wed Aug 22, 2012 5:35 pm
cars: mitz L300
holdens i have owned
TD,TE TG gemini
HBII LC4 UC x2 torana
VH Commodore
EH Special

Re: 16190674 Daewoo ECM

Post by barana »

Any news there fellas? Should I tell me mate who works a t holden to keep a look out for trade in lanii? Or the other mate who lives near a rural tip(natural habitat of lanii ;)
"Its alright for god, he doesnt drive a kingswood.Even the nuns only have toranas"-Ted Bullpit
Me:yeah,corse,God's a Holden man
Mate:whaaa?
Me:Psalm 83:15 so pursue them with your Tempest and terrify them with your Storm
A Holden & a pontiac
Ken
Posts: 206
Joined: Tue Dec 17, 2013 1:05 am

Re: 16190674 Daewoo ECM

Post by Ken »

Found this today when searching for something totally unrelated, even has the 3 screws on the top to hold the board into the case, looks very much like an 808 externally.
ECM number 01227303.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: 16190674 Daewoo ECM

Post by delcowizzid »

303 ecu is not compatable with 808 I have one here I pulled out of a car that should of had an 808 cause it didn't run right things are missing I'll find my thread about it
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Ken
Posts: 206
Joined: Tue Dec 17, 2013 1:05 am

Re: 16190674 Daewoo ECM

Post by Ken »

Yeah I didn't think it would be compatible, it was just that there's no mention of daewoo on the tunerpro sight, even though it seems they run the delco unit.
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: 16190674 Daewoo ECM

Post by antus »

They are more than 10 years apart. Surely related but seem very different at the same time. I dont think anyone knows where to start (or has the interest when there are 808s and other well understood options.)
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Ken
Posts: 206
Joined: Tue Dec 17, 2013 1:05 am

Re: 16190674 Daewoo ECM

Post by Ken »

My line of thinking was more that if the daewoo had the delco, doesn't a daewoo owner stick turbo's & whatnot on them, or are they just not that kind of owner.
Post Reply