Full manual shift bwcs

[js1973]

I am trying to make the vs bwcs tune hold gears when using the shifter and not change by itself.
Would i just set manual mode shift speed vs vkph vs tps values to 300 klms or more would it work or is their a better way to do it.

[krawczuk]

hi, i have instructions on how to modify the trans itself for manual control.
email me if you want a copy.
mark

[darcy]

Set your upshift and down shift values to very low numbers

1>2 = 1kph
2>3 = 3 kph
3>4 = 5kph

4>3 = 4kph
3>2 = 3kph
2>1 = 1kph

Set the value for all TPS values in each table.

This gives the box a way to come back to 1st when you come to a stop, but if you forget to manually select 1st when taking off it will jump back up the gears as soon as you start moving.

[Jervies]

Wouldnt the low up shift speed make it change as soon as you hit them speeds in manual mode?

[Jayme]

no. the forced shift thresholds are set elsewhere.

you also need to turn off kickdown or itll still kick back when you stab it.

[Jervies]

Were do we find these? Cheers