Tricore 1766 Reverse Engineering

Disassembly, Reassembly, Tools and devleopment. Going deep with Hardware and Software.
Posts: 4
Joined: Tue Jul 20, 2021 5:28 pm

Tricore 1766 Reverse Engineering

Postby -Dome- » Wed Jul 21, 2021 6:19 pm

Hi Folks,

does anyone can help me to make a Reverse Engineering from the Tricore 1766 to get the correct maps.
Its a TCU. Micro is attached.

Best regards
Dome
Attachments
micro-20210116-160503.bin
(1.5 MiB) Downloaded 8 times

Posts: 2720
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Tricore 1766 Reverse Engineering

Postby VX L67 Getrag » Wed Jul 21, 2021 8:49 pm

I did look into this slightly a few weeks ago as hptuners have it mapped out so well… it’s in the rangers/bt50 since 2013(ish)

Posts: 4
Joined: Tue Jul 20, 2021 5:28 pm

Re: Tricore 1766 Reverse Engineering

Postby -Dome- » Thu Jul 22, 2021 2:59 pm

That is not from a Ford. Its ja Evo X SST File. Hence the question of whether someone can help.

Posts: 2720
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Tricore 1766 Reverse Engineering

Postby VX L67 Getrag » Fri Jul 23, 2021 8:47 am

Have you got a modified original & tuned version of any of them?

Posts: 4
Joined: Tue Jul 20, 2021 5:28 pm

Re: Tricore 1766 Reverse Engineering

Postby -Dome- » Fri Jul 23, 2021 3:18 pm

There is no tune yet. Since the beginning, only ecu is made. Since it was never possible to flash the tcu via obd and correct the checksum. Now it is possible. There is no Damos or AL2 so reverse engineering is needed to find the right maps. The gearbox also has temperature problems. You could reduce the temps by adapting the software.

I take a Look with winols and find alot of maps inside but i dont know what they do.

Posts: 2720
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Tricore 1766 Reverse Engineering

Postby VX L67 Getrag » Fri Jul 30, 2021 8:01 am

Out of interest what did you use to read it & can it be supported for other manufacturer type tcm's too?

Posts: 4
Joined: Tue Jul 20, 2021 5:28 pm

Re: Tricore 1766 Reverse Engineering

Postby -Dome- » Fri Jul 30, 2021 3:39 pm

PCM Flash can do that with Tactrix.

Posts: 2720
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Tricore 1766 Reverse Engineering

Postby VX L67 Getrag » Fri Jul 30, 2021 6:00 pm

What manufacturer models does it do?

Return to Engineering and Reverse Engineering

Who is online

Users browsing this forum: No registered users and 7 guests