Making a XDF

Disassembly, Reassembly, Tools and devleopment. Going deep with Hardware and Software.
Posts: 6
Joined: Tue Jun 29, 2021 12:12 am

Making a XDF

Postby T-Bird » Thu Oct 07, 2021 10:26 pm

Hi
I have a stock bin file out of my stock CJ lancer. I can not find any XDF files to use. Is there a way to write my own. Or some software that will make a XDF for me, or high light some address. That I can use. I'm mainly using tunerpro RT ECUflash Or pcm hammer.

Posts: 2730
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Making a XDF

Postby VX L67 Getrag » Fri Oct 08, 2021 8:21 am

CJ Lancer, what is the details & setup & why do you need to adjust anything?
Generally you'd need to get a base map layout from winOLS or ECMtitanium or anything that may have map locations & info(longest way is dissasembly but way too hard)... all depends on how much you want to spend & what you want to do.
There is a place out the called OldSkullTuning that sell tunerpro xdf's but doubt they'd support that & their files are locked.

Posts: 1474
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Re: Making a XDF

Postby Charlescrown » Fri Oct 08, 2021 9:52 am

Have a look on the Evoscan website. There's a few listed but not sure if one is your car.

Posts: 71
Joined: Fri Jul 30, 2021 5:49 pm

Re: Making a XDF

Postby Cincinnatus » Wed Oct 13, 2021 2:32 pm


Return to Engineering and Reverse Engineering

Who is online

Users browsing this forum: No registered users and 3 guests