Help with converting .bin to assembly

Disassembly, Reassembly, Tools and devleopment. Going deep with Hardware and Software.
Posts: 137
Joined: Sat Dec 18, 2021 8:15 am
Location: New Jersey, USA

Help with converting .bin to assembly

Postby darkman5001 » Wed Aug 03, 2022 10:16 pm

I have been trying to figure out how to change a bin back into assembly language. I have been playing around with IDA Pro and Visual Studios 2022 and even MCU Xpresso IDE by NXP and have not been successful. My main focus is on the P10 and the P12 PCM flash bins. Any help would be greatly appreciated.

Posts: 438
Joined: Thu Feb 13, 2020 11:32 pm

Re: Help with converting .bin to assembly

Postby ironduke » Wed Aug 03, 2022 10:33 pm

Can't really help but just making sure you saw this.. Not your ecm but should help

viewtopic.php?f=42&t=7920

Site Admin
User avatar
Posts: 7247
Joined: Sat Feb 28, 2009 8:34 pm

Re: Help with converting .bin to assembly

Postby antus » Thu Aug 04, 2022 12:58 pm

P10 and P12 are effectively the same as P01/P59 for purposes of reverse engineering. Only some of the hardware addresses had to be changed to make the P01/P59 kernel run on that platform for pcmhammer. Same CPU type, instruction set though.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 137
Joined: Sat Dec 18, 2021 8:15 am
Location: New Jersey, USA

Re: Help with converting .bin to assembly

Postby darkman5001 » Sat Aug 06, 2022 1:52 pm

ironduke wrote:Can't really help but just making sure you saw this.. Not your ecm but should help

viewtopic.php?f=42&t=7920



Thanks Ironduke. Didn't see this. Tried it and made great progress. Thanks.

Return to Engineering and Reverse Engineering

Who is online

Users browsing this forum: No registered users and 3 guests