Hyundai I30 XDF

Posts: 1309
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Hyundai I30 XDF

Postby Charlescrown » Mon Jul 29, 2013 4:25 pm

I am looking at trying to write an XDF file for a Hyundai I30 Diesel.
I have downloaded the BIN file from my car and can see many areas where there are obvious maps but don't know how to go about deciphering just what they do.
This is a whole new area for tuning common rail diesel and am sure very interesting.
I do know they have several injector pulses on 1 cycle depending on throttle position and load.
One problem I would like to address is the overkill traction control which to the unwary cause a serious accident but to the educated driver not a problem.
The BIN file is 2048kb but it looks like there is a huge amount of wasted space at the start.
Any help in doing this would be much appreciated.

Posts: 413
Joined: Wed Mar 04, 2009 8:52 pm

Re: Hyundai I30 XDF

Postby ejukated » Mon Jul 29, 2013 6:40 pm

Might help to post the bin file. What tool did you use to read it out?

Posts: 1309
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Re: Hyundai I30 XDF

Postby Charlescrown » Wed Jul 31, 2013 5:25 pm

Don't know what went wrong but I'l try again
Attachments
hyundai.bin
(2 MiB) Downloaded 340 times

Posts: 2535
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Hyundai I30 XDF

Postby VX L67 Getrag » Wed Jul 31, 2013 6:11 pm

I was looking into this a little while ago but forgot about it!

Is the PCM like the file I have attached here?

What program did you use to get the dump from?
Attachments
Hyundai i30 Turbo Diesel PCM.txt
(121 Bytes) Downloaded 348 times

Posts: 1309
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Re: Hyundai I30 XDF

Postby Charlescrown » Thu Aug 01, 2013 8:28 am

All I can tell you is the ECU is Bosch EDC16.
I used a program called Galleleio? I think that's how it's spelt. The software came with a USB diagnostic plug to read/write lots of European cars using OBD2 so I just tried a few knowing they are fitted with Bosch and managed to download the bin file.

Posts: 2535
Joined: Sun Aug 02, 2009 9:16 pm
Location: Bayside, Melbourne, Victoria

Re: Hyundai I30 XDF

Postby VX L67 Getrag » Thu Aug 01, 2013 10:44 am

It looks like my info of PCM may also be edc16 as there was a google cross reference to it but Russian!

In your bin it states EDC16c39, there's a whole heap of null data & less than 1/8th of actual data, does the software have a forum for people that have edited the bins?

What year model is yours the 1 I got info off was late 2007 early 2008!

Posts: 1309
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Re: Hyundai I30 XDF

Postby Charlescrown » Mon Aug 05, 2013 2:15 pm

Nor sure but that's probably the best place to go if there is one. Will look around and see just what comes up.

Posts: 1309
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Re: Hyundai I30 XDF

Postby Charlescrown » Mon Aug 05, 2013 2:16 pm

2007

Return to Disassembly and Reassembly

Who is online

Users browsing this forum: No registered users and 1 guest