Delco HDRC (Y17DT DYRX, DMRW & DNLF)

Disassembly, Reassembly, Tools and devleopment. Going deep with Hardware and Software.
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: Delco HDRC (Y17DT DYRX, DMRW & DNLF)

Post by antus »

Usually people would modify the code that reads the map, so it keeps an overflowed value for normal use (most calcs are fine if they still think its 100kpa when its in boost), so you'd copy the 4 bar version in a new memory location, multiply that value in the original location by 4 and set it to max/100kpa if it overflows. Then you'd modify the fuel and spark tables to use the 4 bar value and the rest should be fine without seeing the boost. This way you dont have so many places to modify the code. Hope it helps.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Post Reply