GM E38 E67 E40 Kernel/Bootloader Development Extravaganza
Re: GM E38 E67 E40 Kernel/Bootloader Development Extravaganz
Long time member, first time poster. I've got a 2.4L LE5 + supercharger swapped into my 240sx running an E67. Would be happy to test the software and also possibly build an XDF for the Ecotec E67. Have a few spare ECMs and also I have a couple T42s (4T45E) and an E37 (08 Cobalt Sport 2.4L ECM). I bought one of the OBDX Pro VT units that became available a couple months ago. What interfaces are currently supported by this software?
Re: GM E38 E67 E40 Kernel/Bootloader Development Extravaganz
Can't wait to get my hands on a copy mate!!!
Awesome work as always
Awesome work as always
-
- Posts: 6
- Joined: Tue Jul 25, 2017 11:53 am
- cars: Cobalt Sport 2.4l
Re: GM E38 E67 E40 Kernel/Bootloader Development Extravaganz
Got a couple E37's here with corrupted serial numbers and VIN's. Have a mongoose J2534. Any way to fix these SN's on these?
Re: GM E38 E67 E40 Kernel/Bootloader Development Extravaganz
Probably?? I believe the cou/flash is very similar or identical to that of the E38, but I have yet to strip one apart and look into it.Hexadecimal wrote:Got a couple E37's here with corrupted serial numbers and VIN's. Have a mongoose J2534. Any way to fix these SN's on these?
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
-
- Posts: 397
- Joined: Wed Jul 05, 2017 8:30 am
- cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E - Location: North TX, USA
Re: GM E38 E67 E40 Kernel/Bootloader Development Extravaganz
Hi all,
What cars did the E37 come in?
Which engines?
Mike
What cars did the E37 come in?
Which engines?
Mike
- FriskyDingo
- Posts: 45
- Joined: Wed May 19, 2021 6:11 am
Re: GM E38 E67 E40 Kernel/Bootloader Development Extravaganz
Mostly Cobalts/G5s/HHRs. The HHR has flexfuelMudDuck514 wrote:Hi all,
What cars did the E37 come in?
Which engines?
Mike
-
- Posts: 397
- Joined: Wed Jul 05, 2017 8:30 am
- cars: 2001 Pontiac Grand AM SE
LD9 2.4l I4, 4T40E
2005 Chevrolet Venture
LA1 3400 V6, 4T65E - Location: North TX, USA
Re: GM E38 E67 E40 Kernel/Bootloader Development Extravaganz
Thanks.FriskyDingo wrote:
Mostly Cobalts/G5s/HHRs. The HHR has flexfuel
Next question, would that be the 2002 to 2006 2.2l or the 2007 up 2.2l?
Or do they use the same ECM?
Mike
- Tre-Cool
- Posts: 290
- Joined: Tue Oct 16, 2012 12:17 pm
- cars: VY SS UTE, VX Drag Car
- Location: Perth
- Contact:
Re: GM E38 E67 E40 Kernel/Bootloader Development Extravaganz
Taz, did you ever manage to get e98 read/write/cloning working?
I might need to clone my dads colorado ecu if 1 the injector drivers turned out to be rooted.
I might need to clone my dads colorado ecu if 1 the injector drivers turned out to be rooted.
- FriskyDingo
- Posts: 45
- Joined: Wed May 19, 2021 6:11 am
Re: GM E38 E67 E40 Kernel/Bootloader Development Extravaganz
07-08 2.2l for g5/cobaltMudDuck514 wrote:Thanks.FriskyDingo wrote:
Mostly Cobalts/G5s/HHRs. The HHR has flexfuel
Next question, would that be the 2002 to 2006 2.2l or the 2007 up 2.2l?
Or do they use the same ECM?
Mike
Also the last few years of sky/solstice with 2.4
For hhr I think its 09-11 2.2l
Re: GM E38 E67 E40 Kernel/Bootloader Development Extravaganz
Unfortunately not, I went as far as decompiling GM/Holdens kernel to see what they did, seemed pretty straight forward to implement. Its just a matter of updating the erase/write/read routines and canbus registers realistically.Tre-Cool wrote:Taz, did you ever manage to get e98 read/write/cloning working?
I might need to clone my dads colorado ecu if 1 the injector drivers turned out to be rooted.
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726