Looking for someone willing to take a project on to disassemble a MPC5554 ECM need to be able to find DTC and Function to disable. Will pay for time.
Also looking for someoone who is good in finding seed keys to make a J2534 Flash Tool on Bosch ECM or Delphi
MPC5554 Disassembly Project
Re: MPC5554 Disassembly Project
You might be underestimating the time it takes to disassemble an entire ECM, its quite the task!
Iv spent multiple hundreds of hours on the MPC5XX ecus for reverse engineering and developing a custom kernel for read/writing. It would be MANY hundreds of hours more to be reverse engineering the operating system/tables ect.
Just wanted to give you an idea of time involved in such undertakens
Iv spent multiple hundreds of hours on the MPC5XX ecus for reverse engineering and developing a custom kernel for read/writing. It would be MANY hundreds of hours more to be reverse engineering the operating system/tables ect.
Just wanted to give you an idea of time involved in such undertakens
Your Local Aussie Reverse Engineer
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
Contact for Software/Hardware development and Reverse Engineering
Site:https://www.envyouscustoms.com
Mob:+61406 140 726
-
- Posts: 2883
- Joined: Sun Aug 02, 2009 9:16 pm
- Location: Bayside, Melbourne, Victoria
- Contact:
Re: MPC5554 Disassembly Project
Have you got the stock bin file from such controller & what is it from & what do you want to do with it?
Re: MPC5554 Disassembly Project
here is attached file https://mega.nz/#!fPAzxYCY!WSNhJOw8rm9L ... TcwwhHVZR8
its from a Niss--an Truck Using a TR-W EM-S2.2 ECM
its from a Niss--an Truck Using a TR-W EM-S2.2 ECM