N13 ecu 1227808

Disassembly, Reassembly, Tools and devleopment. Going deep with Hardware and Software.
zed280
Posts: 13
Joined: Wed Feb 17, 2021 1:34 pm
cars: pulsar n13
Location: brisbane

Re: N13 ecu 1227808

Post by zed280 »

Changed distributor even boutht a new one Ebay module lasted 30 min trip and failed , pickup coil tests in spec
changed module runes again but same still
have done voltage test on earth wires ,ok even voltage drop test on earth
am looking at positive voltage test here all seams ok
have been reading that the intake air temp sender affects timing
Pontiac Fiero uses similar ecu system
http://www.fieros.de/en/articles/ignition.html
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: N13 ecu 1227808

Post by antus »

do you mean ebay module worked for 30 mins? if so, sounds like you found the problem just the ebay aftermarket module was junk. would be worh replacing it with another oem module from the wreckers.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Charlescrown
Posts: 1831
Joined: Sat Aug 06, 2011 7:58 am
cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes
Location: Padstow NSW

Re: N13 ecu 1227808

Post by Charlescrown »

The intake air sensor is just a trimmer and wouldn't have a dramatic effect. I think you need to look outside what you think it may be. Parts darts is expensive and these systems are really quiet simple. Getting back to the timing shift. When does it do it and how are you viewing it? Have you bypassed any of the relays?
BennVenn
Posts: 475
Joined: Fri Mar 04, 2016 10:35 am
cars: R33 GTST, '60 Vw Bug, Express (4G63T), GW X200
Location: Windellama, NSW
Contact:

Re: N13 ecu 1227808

Post by BennVenn »

Air temp sensor (if its the 1.8, the 1.6 doesn't have one) will really mess with spark timing. Likewise for 12p. After converting my bug to delco and not having an IAT sensor, spark timing was pretty much random no matter what was commanded.

Sounds more like the spark module to me though
Post Reply