LS1 Boost OS - Development

For discussion and distribution of custom code and hacks
Posts: 352
Joined: Wed Apr 11, 2018 8:50 am

Re: LS1 Boost OS - Development

Postby bubba2533 » Wed Sep 21, 2022 5:09 am

Version 3.0 is live on my Patreon. I know I'll never recoup all of time I've spent on this, but I figured I would try and limit the amount of people using it in case there were issues with it.

There are a couple difficulty's with using it as PCM Hammer Version 21 doesn't like the new OSID so Version 20 must be used.

Also Universal Patcher has problems for the same reason, so hopefully that can be updated to allow segment swaps between my custom OS and standard 12587603 segments.
LS1 Boost OS: If you have Questions about the current release post Here. If you have feature suggestions post in the Development Thread

Posts: 419
Joined: Sun Mar 22, 2009 11:52 am
Location: Sydney

Re: LS1 Boost OS - Development

Postby kojab » Wed Sep 21, 2022 11:06 am

bubba2533 wrote:
kojab wrote:Have a problem with the 3 BAR "Open Loop EQ'' table. It is not seeing any boost. Tried "slowtahoe's" Custom 2 BAR bin on my test bench and it seems to have the same problem.

I'm not sure what you mean by not seeing any boost. Can you explain what you are doing?

Sorry I should have spent more time before posting my findings posted above which are probably incorrect.


Going to put the 3 BAR Open Loop EQ table into RTLS1 and do a few logs on the road and see what it's doing. Should have done this before as bench testing has it's limits.

Getting close to 20 PSI boost now so this Open Loop EQ table is vital. Will report back.


3 BAR "Open Loop EQ'' table working fine. Thank you again Bubba for getting your Boost OSs to run with the RTLS1.

Posts: 3
Joined: Thu Apr 28, 2022 5:49 am

Re: LS1 Boost OS - Development

Postby Broke4speed » Fri Sep 30, 2022 7:33 am

Subscribed on Patreon. Thanks for all the hard work! :)


Return to Custom Code

Who is online

Users browsing this forum: No registered users and 1 guest