VS-VY Enhanced Factory Bins

For discussion and distribution of custom code and hacks
immortality
Posts: 3425
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: VS-VY Enhanced Factory Bins

Post by immortality »

Yes they are 0-5 volt sensors.
In-Tech
Posts: 787
Joined: Mon Mar 09, 2020 4:35 pm
Location: California

Re: VS-VY Enhanced Factory Bins

Post by In-Tech »

Hello,
Are you sure these are 3 wire 0-5v sensor? The output does look linear but it appears to be a thermistor ohm output. I have hunted long and hard for a 0-5 linear output temp sensor.
immortality
Posts: 3425
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: VS-VY Enhanced Factory Bins

Post by immortality »

They are 2 wire same as the factory GM type sensor. On the website linked earlier it has all the info
lludorf
Posts: 2
Joined: Thu May 31, 2018 7:31 pm
cars: Vs v6 acclaim wagon

Re: The1's Enhanced Factory Bins

Post by lludorf »

charlay86 wrote:Is anyone interested in flex fuel support?
yes please!!!!!!!!
PHLTHS
Posts: 1
Joined: Fri Feb 04, 2022 1:08 pm
cars: HSV W427, HSV SportsCAT SV, Holden VX Calais, Holden VY II Calais
Location: Melbourne

Re: The1's Enhanced Factory Bins

Post by PHLTHS »

charlay86 wrote:Is anyone interested in flex fuel support?
I am, yes please. It would be awesome to be able to use E85 and have blend tables for timing, fueling, cranking etc. :punk:
encrypted
Posts: 4
Joined: Wed Jun 17, 2020 9:30 pm
cars: vy calais vy spac sedan vy spac ute
Ve omega

Re: VS-VY Enhanced Factory Bins

Post by encrypted »

Having issues with changing to negative spark in the high and low octane tables for stupid crackle on decel on the vs v6 enhanced bin and xdf when I say set the decel tables to neg-15 and save it then reopen it it’s at 0 not-15 if there a max retard table somewhere im missing that needs to be changed like vx/vy v6 any help is appreciated
User avatar
antus
Site Admin
Posts: 8251
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: VS-VY Enhanced Factory Bins

Post by antus »

if you are prepared to take the risk try the xdf for the non-enhanced version *of the same os*. The enhanced are patched, not rebuilds so items that work on the factory OS but are omitted from enhanced are probably still there and likely to work.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: VS-VY Enhanced Factory Bins

Post by The1 »

encrypted wrote:Having issues with changing to negative spark in the high and low octane tables for stupid crackle on decel on the vs v6 enhanced bin and xdf when I say set the decel tables to neg-15 and save it then reopen it it’s at 0 not-15 if there a max retard table somewhere im missing that needs to be changed like vx/vy v6 any help is appreciated
Unfortunately the factory code starts at 00 Hex as 0 spark. This changed with VT.

You can work around it by using the Extended Intake Air tables to offset the spark into negative down low perhaps as ive codded them to allow negative.
User avatar
hsv08
Posts: 547
Joined: Thu May 09, 2013 6:50 pm
cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK

Re: VS-VY Enhanced Factory Bins

Post by hsv08 »

Has anybody worked out where the address location for DTC92 - Low speed fan communication failure is on the Flash Ecus?

Just to turn that processing off for when running flash pcms in standalone configuration without a bcm?
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: VS-VY Enhanced Factory Bins

Post by The1 »

hsv08 wrote:Has anybody worked out where the address location for DTC92 - Low speed fan communication failure is on the Flash Ecus?

Just to turn that processing off for when running flash pcms in standalone configuration without a bcm?
Try these and let me know, if it's good then ill update the main page.
Attachments
VY_V6_$060A_Enhanced_v0.9h.xdf
(319.76 KiB) Downloaded 158 times
VX_V6_$BD_Enhanced_v0.9g.xdf
(294.94 KiB) Downloaded 153 times
Post Reply