VS-VY Enhanced Factory Bins

For discussion and distribution of custom code and hacks
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Post by The1 »

It should be in wiring section, look at pcm pinout, cut near pcm and put switch in, aldl needs ground and data.
dusto
Posts: 109
Joined: Sun Mar 13, 2016 4:04 pm
cars: VE Maloo GXP
VY Tonner L67
Captiva
SV1000s
ER6-Race bike

Re: The1's Enhanced Factory Bins

Post by dusto »

looking at disconecting the bcm from ecu as talked about here.
I've got the diagrams it appears there are 2 wires a MMR and a MMI which one needs to be cut?
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: The1's Enhanced Factory Bins

Post by antus »

I think its labelled 'serial data', should only be 1 wire. Usually ALDL is a red and black wire, but im normally patching wires around the aldl connection. Not sure if its the same at the BCM. Wiring diagrams should tell you.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
dusto
Posts: 109
Joined: Sun Mar 13, 2016 4:04 pm
cars: VE Maloo GXP
VY Tonner L67
Captiva
SV1000s
ER6-Race bike

Re: The1's Enhanced Factory Bins

Post by dusto »

im confused as the one said cut it near the pcm?

if i do that it will stop the cable from being connected to the pcm,

if i cut it near the BCM it should work fine ? also easy to have a switch tucked up near the aldl port
dusto
Posts: 109
Joined: Sun Mar 13, 2016 4:04 pm
cars: VE Maloo GXP
VY Tonner L67
Captiva
SV1000s
ER6-Race bike

Re: The1's Enhanced Factory Bins

Post by dusto »

ok so i cut the red and black wire up near the bcm, this is where i originally thought but got confused after reading here, i then wired in a small toggle that i have mounted on the aldl/obd2 port.

all is working as it should.

Thanks for all help :punk:
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: The1's Enhanced Factory Bins

Post by Wade »

Can we get more extra ecu inputs?
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Post by The1 »

there was only 2 spare from the factory.
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: The1's Enhanced Factory Bins

Post by Wade »

Can we get an enhanced repository going like there is with 12 and 11p?
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Post by The1 »

Not sure what you mean
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: The1's Enhanced Factory Bins

Post by delcowizzid »

He means a custom tuned bin thread for enhanced like we have for 12p
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Post Reply