Strange reading when logging 12P

For discussion and distribution of custom code and hacks
Posts: 1117
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Strange reading when logging 12P

Postby Charlescrown » Thu May 10, 2018 12:42 pm

The first thing is the scaled map voltage shows 5 volts KOEO when it is actually 1.6 being a 3 bar map sensor.
Please have a look at my log and if anyone can explain why the injector BPW is going to zero. It's very noticeable after 1 min 58.
I have tried another ECU and memcal but nothing makes a difference.

Can't work out how to put up both XDL and ADX

so heres the XDL
Attachments
12P80812.XDL
(133.04 KiB) Downloaded 18 times
Last edited by Charlescrown on Thu May 10, 2018 12:44 pm, edited 1 time in total.

Posts: 1117
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Re: Strange reading when logging 12P

Postby Charlescrown » Thu May 10, 2018 12:43 pm

And heres the ADX.
Attachments
12P808_3bar.adx
(91.59 KiB) Downloaded 25 times

Posts: 1117
Joined: Sat Aug 06, 2011 7:58 am
Location: Padstow NSW

Re: Strange reading when logging 12P

Postby Charlescrown » Wed May 30, 2018 9:38 am

Problem fixed. After a lot of frustration a call from kojab resolved the problem. No shielding on the inductive trigger wiring. The wiring was replaced and the shielding earthed and it hasn't missed a beat in a couple of weeks and the idle can be set as low as 600rpm with no issues. I must have pushed the coil HT lead close to the wiring when I put in a new battery.

Site Admin
User avatar
Posts: 5296
Joined: Sat Feb 28, 2009 8:34 pm

Re: Strange reading when logging 12P

Postby antus » Wed May 30, 2018 10:11 am

Thanks for the update!
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Return to Custom Code

Who is online

Users browsing this forum: No registered users and 3 guests