I am making some assumptions here so PLEASE correct me where i am wrong
According to the ose12p-111 adx B2 - 0-25V
Holden had used it for cranking input on a V6 commodore.
This page -- > https://pcmhacking.net/forums/viewtopic.php?f=27&t=356
states the 18x stuff has been removed from ose12p 111 so i assume this input b2 can be used as a generic spare analog input
Also on the page link above it states a new feature
--- > 0-25v A/D Read For Pin B12 And Included In Message 0
This looks like a typo as b12 in the ADX is 0-5volts not 0-25 volts..
I don't want to blow up my ecm putting more then 5 volts into the ADC ???
Pin B2 & B12 Function
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: Pin B2 & B12 Function
Correct, was a typo until V1.1.1. It should read ..
0-25v A/D Read For Pin B2 And Included In Message 0
0-5v A/D Read For Pin B12 And Included In Message 0
Have fixed that now
0-25v A/D Read For Pin B2 And Included In Message 0
0-5v A/D Read For Pin B12 And Included In Message 0
Have fixed that now