Hey guys is there any provision or way to have wastegate control (with a solidnoid or so) with 12p?
I think the vs - vy super 6 has some sorta solidoid ive been told that does the same.
12p wastegate control
- VL400
- Posts: 4991
- Joined: Sun Mar 01, 2009 2:54 pm
- cars: VL Calais and Toyota Landcruiser. Plus some toys :)
- Location: Perth, WA
- Contact:
Re: 12p wastegate control
There is no PID wastegate control for proper boost control in 12P, but the flex outputs can be used for basic solenoid control.
Re: 12p wastegate control
for reference, the solenoid in a super6 isnt a boost control solenoid, its a bypass control solenloid to open a bypass valve while cruising so power isnt wasted compressing air for no reason.
Re: 12p wastegate control
The bypass actuator in an L67 is usually controlled by manifold vacuum, but the PCM can operate a solenoid that will force the supercharger to be bypassed regardless of the manifold vacuum/boost. It does this when reverse gear is selected and also to prevent damage to the engine.
Re: 12p wastegate control
Looks like im outa luck then
Thanks anyways guys
Thanks anyways guys