vr auto PCM to Vn 808 with Emulator 12P

For discussion and distribution of custom code and hacks
Post Reply
turbov8
Posts: 100
Joined: Sun Oct 03, 2010 10:08 pm
cars: VR SS TURBO AUTO

vr auto PCM to Vn 808 with Emulator 12P

Post by turbov8 »

may be a stupid question, but as im getting bored with waiting for the new trans.. Can i repin the Vr auto loom. fit the 808 with nvram and emulator, and atleast start tuning the idle and stuff while the 4l40E is still in? maybe unplugged?
or no?
cheers
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: vr auto PCM to Vn 808 with Emulator 12P

Post by Holden202T »

i think the main difference will be the injectors are two seperate wires on the VR Auto, but you can just join them for the 808, other than that i don't see an issue
User avatar
Jayme
Posts: 2585
Joined: Sun Mar 01, 2009 8:59 am
Location: North Coast, NSW

Re: vr auto PCM to Vn 808 with Emulator 12P

Post by Jayme »

the injectors are 2 separate wires ont he 808 too :P ive repinned a few, and if its only temporary, id not recommend it, it takes a few hours. just label the wires with masking tape, where it came from and where its going, then pull them all out and swap. the auto has 2 less earths than the 808 tho so you need to join in 2 more pins to create them.
turbov8
Posts: 100
Joined: Sun Oct 03, 2010 10:08 pm
cars: VR SS TURBO AUTO

Re: vr auto PCM to Vn 808 with Emulator 12P

Post by turbov8 »

Thanks guys appreciate the input.
I might aswell change the loom for the correct one...
Just means i have to remove the turbo again.... which is so annoying.
I guess it wasnt mean to be easy...
Post Reply