VS-VY Enhanced Factory Bins
Re: The1's Enhanced Factory Bins
It should be in wiring section, look at pcm pinout, cut near pcm and put switch in, aldl needs ground and data.
-
- Posts: 109
- Joined: Sun Mar 13, 2016 4:04 pm
- cars: VE Maloo GXP
VY Tonner L67
Captiva
SV1000s
ER6-Race bike
Re: The1's Enhanced Factory Bins
looking at disconecting the bcm from ecu as talked about here.
I've got the diagrams it appears there are 2 wires a MMR and a MMI which one needs to be cut?
I've got the diagrams it appears there are 2 wires a MMR and a MMI which one needs to be cut?
- antus
- Site Admin
- Posts: 8253
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: The1's Enhanced Factory Bins
I think its labelled 'serial data', should only be 1 wire. Usually ALDL is a red and black wire, but im normally patching wires around the aldl connection. Not sure if its the same at the BCM. Wiring diagrams should tell you.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 109
- Joined: Sun Mar 13, 2016 4:04 pm
- cars: VE Maloo GXP
VY Tonner L67
Captiva
SV1000s
ER6-Race bike
Re: The1's Enhanced Factory Bins
im confused as the one said cut it near the pcm?
if i do that it will stop the cable from being connected to the pcm,
if i cut it near the BCM it should work fine ? also easy to have a switch tucked up near the aldl port
if i do that it will stop the cable from being connected to the pcm,
if i cut it near the BCM it should work fine ? also easy to have a switch tucked up near the aldl port
-
- Posts: 109
- Joined: Sun Mar 13, 2016 4:04 pm
- cars: VE Maloo GXP
VY Tonner L67
Captiva
SV1000s
ER6-Race bike
Re: The1's Enhanced Factory Bins
ok so i cut the red and black wire up near the bcm, this is where i originally thought but got confused after reading here, i then wired in a small toggle that i have mounted on the aldl/obd2 port.
all is working as it should.
Thanks for all help
all is working as it should.
Thanks for all help
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: The1's Enhanced Factory Bins
Can we get more extra ecu inputs?
Re: The1's Enhanced Factory Bins
there was only 2 spare from the factory.
-
- Posts: 562
- Joined: Mon Jul 11, 2016 6:29 am
- cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport
Re: The1's Enhanced Factory Bins
Can we get an enhanced repository going like there is with 12 and 11p?
Re: The1's Enhanced Factory Bins
Not sure what you mean
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: The1's Enhanced Factory Bins
He means a custom tuned bin thread for enhanced like we have for 12p
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem