The1's Enhanced Factory Bins

For discussion and distribution of custom code and hacks
User avatar
Posts: 4085
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Postby The1 » Sun Jun 17, 2018 4:13 pm

ive done this on my dev boards, but havn't on anyone else's, you'd hope to not brick it very often if ever. But no reason you can't if you want to.

User avatar
Posts: 216
Joined: Sun Jan 25, 2015 4:21 pm
Location: Sydney

Re: The1's Enhanced Factory Bins

Postby j_ds_au » Thu Mar 14, 2019 11:20 am

OK, I've got a question regarding the application of these enhanced firmware bins. If upgrading say, VS V6 N/A firmware "BWPJ" to "VS_V6_$51_Enhanced_v1.4b", by burning onto a memcal, does the enhanced firmware use the existing data structures in EEPROM "as is" or does it use a different/incompatible layout? If the former, then I can simply swap between the two firmware bins at will. If the latter, what steps are required to "migrate" the existing EEPROM data?

Joe.

User avatar
Posts: 4085
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Postby The1 » Thu Mar 14, 2019 11:52 am

firmwares can't be swapped as the code is different in that the extra changes made and some of the old CAL and Program area is changed and used also for VS V6 N/A Enhanced it's based off CKUL. You will need to have 2 tunerpro windows open, one with old setup and one with new enhanced setup and copy across the tables and values manually then reburn the whole bin to the chip.

User avatar
Posts: 216
Joined: Sun Jan 25, 2015 4:21 pm
Location: Sydney

Re: The1's Enhanced Factory Bins

Postby j_ds_au » Sat Mar 16, 2019 9:14 pm

Thanks, Nigel!

Joe.

Previous

Return to Custom Code

Who is online

Users browsing this forum: No registered users and 1 guest