VS-VY Enhanced Factory Bins

For discussion and distribution of custom code and hacks
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Post by The1 »

what settings have you got, the below should work.
Attachments
egr.JPG
egr.JPG (71.75 KiB) Viewed 6959 times
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: The1's Enhanced Factory Bins

Post by delcowizzid »

I never changed the one labelled coolant check I'll reflash today and see what happens 100% egr going up hill at 80kmh sucks lol
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Post by The1 »

yeh factory ones at 5c so wont enable the coolant check.
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: The1's Enhanced Factory Bins

Post by Holden202T »

ahh yeah that would do it!
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: The1's Enhanced Factory Bins

Post by delcowizzid »

Ok startup coolant check temp has sorted it she doesn't activate now thanks :driving: now to find some down low power it feels like torque reduction active at low revs then it just pulls like a train might be time to fit the wideband and force open loop for some fueling checks.especially after I gut the cat tomorrow lol
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
Holden202T
Posts: 10311
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW
Contact:

Re: The1's Enhanced Factory Bins

Post by Holden202T »

needs more timing down low ?
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Post by The1 »

Vx flash usually has plenty of spark, check for retard
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: The1's Enhanced Factory Bins

Post by delcowizzid »

Could be nearly 500k km of timing chain stretch lol.its never been sharp or responsive my mates vy eco had a lot more down low and it was a high km taxi I'll shove the wideband up it and see where I'm at
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Post by The1 »

Did you lower the pe cutin it's like 60% TPS from factory
User avatar
JA2Z
Posts: 76
Joined: Tue Mar 08, 2016 9:59 am
cars: - WH II 5.7L Statesman (daily)
- VT 5.0L Calais
- 1994 Ford Probe V6 DOHC
- 2007 Ford Focus TDCI 2.0
Location: East Gippsland, Victoria
Contact:

Re: The1's Enhanced Factory Bins

Post by JA2Z »

Hi Mate,

I went to update the bin from 0.91 Enhanced to 1.00 to enable the WIDEBAND and MAP A5/B10 input support, it failed, and now I've lost comms to the NVRAM - I can't get hardware to detect anymore and no vehicle start even though it does crank.

Can I attempt to use OSE flash tool to upload the bin if I have no emulation hardware detected in Tuner Pro?

and if so, what options to I select, because VT V8 isn't listed in the drop-down box.


I tried my old cheap USB ALDL interface just to check, but still no dice.

Tried the Factory memcal, but I have no BCM, so not even a crank attempt.

If I didn't have "No hardware detected" I would just suspect I'd run out of fuel, but it won't start right after a unsuccessful bin write.

Any help would be appreciated.
Post Reply