The1's Enhanced Factory Bins

For discussion and distribution of custom code and hacks
User avatar
Posts: 4604
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Postby The1 » Tue Jul 06, 2021 9:38 am

yes it should stay in open loop, no time delay from closed to open loop.

Posts: 24
Joined: Sun Mar 15, 2020 7:25 pm

Re: The1's Enhanced Factory Bins

Postby Rhysk94 » Tue Aug 17, 2021 9:08 pm

Can be done easily such as in this vid :cash:

[youtube]https://www.youtube.com/channel/UC9mxPSbP55Odjc5acnkETHA[/youtube]

Posts: 3
Joined: Sat Apr 10, 2021 4:24 pm

Re: The1's Enhanced Factory Bins

Postby Patto » Tue Oct 12, 2021 4:56 pm

Hi all, I'm about to tune my VS V6 with EnhancedMod and have got 2 Innovate Wide Band O2 sensors so I can monitor AFR/Lambda as I drive. The only question I have at the moment is. Can I use both pin A5 and B10 to tune with both widebands or does EnhancedMod require that I keep 1 narrowband operational.

User avatar
Posts: 4604
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Postby The1 » Wed Oct 13, 2021 7:58 am

you can use both A5 and B10 for widebands, just change the adx parameters to suit. If you check the flag single o2 sensor then just use the 1 narrowband on the drivers side.

Posts: 3
Joined: Sat Apr 10, 2021 4:24 pm

Re: The1's Enhanced Factory Bins

Postby Patto » Wed Oct 13, 2021 4:07 pm

The1 wrote:you can use both A5 and B10 for widebands, just change the adx parameters to suit. If you check the flag single o2 sensor then just use the 1 narrowband on the drivers side.
Is this the one you are referring to?
Attachments
Screenshot at 2021-10-13 17-04-59.png

User avatar
Posts: 4604
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Postby The1 » Thu Oct 14, 2021 8:19 am

yes

Posts: 3
Joined: Sat Apr 10, 2021 4:24 pm

Re: The1's Enhanced Factory Bins

Postby Patto » Thu Oct 14, 2021 9:07 am

Thanks, weather permitting I'll try to get to it this weekend.

Posts: 3150
Joined: Thu Apr 09, 2009 12:31 pm

Re: The1's Enhanced Factory Bins

Postby immortality » Tue Nov 30, 2021 11:52 am

Hi mate,

Just wondering if there are more dwell settings for the ignition system or what we see is all there is for ecotec/L67 tunes?

Thanks

Posts: 172
Joined: Mon Dec 12, 2016 11:27 am

Re: The1's Enhanced Factory Bins

Postby L67PSI » Sat May 07, 2022 4:01 pm

Just wondering the same as the previous question. In the Enhanced code is there a way to adjust the dwell time? I have a LS coil driver from Ryan - VL400 and he was able to tweak it somehow, but I cant see anything defined for this.

User avatar
Posts: 4604
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Postby The1 » Mon May 09, 2022 9:54 am

pretty sure the DFI has alot to do with that, hence why Ryan's board used the output of the DFI to then control from there the spark.

Previous

Return to Custom Code

Who is online

Users browsing this forum: No registered users and 1 guest