VS-VY Enhanced Factory Bins

For discussion and distribution of custom code and hacks
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Post by The1 »

yes it should stay in open loop, no time delay from closed to open loop.
User avatar
Rhysk94
Posts: 42
Joined: Sun Mar 15, 2020 7:25 pm
cars: VE SS-V
VY V6 Turbo “Ecojet”
FG XR6 Turbo
VY V6 Stocker Farm Hack
VY V6 Turbo Manual Drift Hack
VY L67 Calais
N80 Toyota Hilux
VX Stocker Farm Hack
FG XR6 Turbo
Location: Perth
Contact:

Re: The1's Enhanced Factory Bins

Post by Rhysk94 »

Can be done easily such as in this vid :cash:

[youtube]https://www.youtube.com/watch?v=RhlFeCC8H0g[/youtube]
Patto
Posts: 3
Joined: Sat Apr 10, 2021 4:24 pm

Re: The1's Enhanced Factory Bins

Post by Patto »

Hi all, I'm about to tune my VS V6 with EnhancedMod and have got 2 Innovate Wide Band O2 sensors so I can monitor AFR/Lambda as I drive. The only question I have at the moment is. Can I use both pin A5 and B10 to tune with both widebands or does EnhancedMod require that I keep 1 narrowband operational.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Post by The1 »

you can use both A5 and B10 for widebands, just change the adx parameters to suit. If you check the flag single o2 sensor then just use the 1 narrowband on the drivers side.
Patto
Posts: 3
Joined: Sat Apr 10, 2021 4:24 pm

Re: The1's Enhanced Factory Bins

Post by Patto »

The1 wrote:you can use both A5 and B10 for widebands, just change the adx parameters to suit. If you check the flag single o2 sensor then just use the 1 narrowband on the drivers side.
Is this the one you are referring to?
Attachments
Screenshot at 2021-10-13 17-04-59.png
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Post by The1 »

yes
Patto
Posts: 3
Joined: Sat Apr 10, 2021 4:24 pm

Re: The1's Enhanced Factory Bins

Post by Patto »

Thanks, weather permitting I'll try to get to it this weekend.
immortality
Posts: 3410
Joined: Thu Apr 09, 2009 12:31 pm
cars: VH, VN, VS, VX

Re: The1's Enhanced Factory Bins

Post by immortality »

Hi mate,

Just wondering if there are more dwell settings for the ignition system or what we see is all there is for ecotec/L67 tunes?

Thanks
L67PSI
Posts: 177
Joined: Mon Dec 12, 2016 11:27 am
cars: L67 VT Calais

Re: The1's Enhanced Factory Bins

Post by L67PSI »

Just wondering the same as the previous question. In the Enhanced code is there a way to adjust the dwell time? I have a LS coil driver from Ryan - VL400 and he was able to tweak it somehow, but I cant see anything defined for this.
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Post by The1 »

pretty sure the DFI has alot to do with that, hence why Ryan's board used the output of the DFI to then control from there the spark.
Post Reply