VS-VY Enhanced Factory Bins

[immortality]

Yep, selected VT in the plugin.

Tried connecting a couple of times before going to the VX ADX but I will try again next time I have access to the vehicle.

[antus]

The other potential issue is that the silence chatter, when it works also times out. Its worth connecting, then start logging (even if your not using it) just to keep the pcm silenced. If you let it sit the chatter will start up again after 30 seconds? something like that and then your logging will turn to shit when you start it up. If this happens, hit connect again and it'll silence the pcm and reconnect and your at a good starting point again.

[immortality]

I was having some other issues which may possibly be tunerpro related.

I could only get it to connect to the PCM once. If there was an issue then I had to re-boot tunerpro to get it to connect again.

Also, it seems that regular laptops aren't happy in his dyno room, the operator runs solid state hardware for this reason. Once, when we left a window down the noise gets to much mine stops logging until the noise drops.

I did however still have connection issues even with only the ignition on so I don't think the 2 issues are related.


I've also found that if I'm in the monitors screen and use the slider at the top LH side to adjust the time scale that it tends to crash Tunerpro.

[antus]

Lastest tunerpro? Mark has changed the monitors code a couple of times, you might have a flakey version.

[immortality]

I think it's the latest, only recently updated. version 5.00.8383.0

[tav]

VS S/C Bin works great

[hoosedamoose]

+1 on what tav said.

[vc81]

Is there going to be a VT V6 NA Auto extended bin released?

[The1]

its in beta, but havn't had any testers, if you want to beta test let me know.

[damiandownie]

its in beta, but havn't had any testers, if you want to beta test let me know.

na bin vt v6 manual extended bin runs well. How did you go with the egr flag showing still?