VS-VY Enhanced Factory Bins
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: The1's Enhanced Factory Bins
Yep, selected VT in the plugin.
Tried connecting a couple of times before going to the VX ADX but I will try again next time I have access to the vehicle.
Tried connecting a couple of times before going to the VX ADX but I will try again next time I have access to the vehicle.
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: The1's Enhanced Factory Bins
The other potential issue is that the silence chatter, when it works also times out. Its worth connecting, then start logging (even if your not using it) just to keep the pcm silenced. If you let it sit the chatter will start up again after 30 seconds? something like that and then your logging will turn to shit when you start it up. If this happens, hit connect again and it'll silence the pcm and reconnect and your at a good starting point again.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: The1's Enhanced Factory Bins
I was having some other issues which may possibly be tunerpro related.
I could only get it to connect to the PCM once. If there was an issue then I had to re-boot tunerpro to get it to connect again.
Also, it seems that regular laptops aren't happy in his dyno room, the operator runs solid state hardware for this reason. Once, when we left a window down the noise gets to much mine stops logging until the noise drops.
I did however still have connection issues even with only the ignition on so I don't think the 2 issues are related.
I've also found that if I'm in the monitors screen and use the slider at the top LH side to adjust the time scale that it tends to crash Tunerpro.
I could only get it to connect to the PCM once. If there was an issue then I had to re-boot tunerpro to get it to connect again.
Also, it seems that regular laptops aren't happy in his dyno room, the operator runs solid state hardware for this reason. Once, when we left a window down the noise gets to much mine stops logging until the noise drops.
I did however still have connection issues even with only the ignition on so I don't think the 2 issues are related.
I've also found that if I'm in the monitors screen and use the slider at the top LH side to adjust the time scale that it tends to crash Tunerpro.
- antus
- Site Admin
- Posts: 8251
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: The1's Enhanced Factory Bins
Lastest tunerpro? Mark has changed the monitors code a couple of times, you might have a flakey version.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 3426
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: The1's Enhanced Factory Bins
I think it's the latest, only recently updated. version 5.00.8383.0
Re: The1's Enhanced Factory Bins
VS S/C Bin works great
-
- Posts: 66
- Joined: Thu Nov 14, 2013 9:44 pm
- cars: vs statesman
Re: The1's Enhanced Factory Bins
+1 on what tav said.
Re: The1's Enhanced Factory Bins
Is there going to be a VT V6 NA Auto extended bin released?
Re: The1's Enhanced Factory Bins
its in beta, but havn't had any testers, if you want to beta test let me know.
-
- Posts: 23
- Joined: Sun Oct 28, 2012 1:50 pm
- cars: VT V6 S/C FMIC 17 pulley, 5 Speed Manual, kalmaker mafless, extractors, zorst, cammed.
- Location: Macksville
Re: The1's Enhanced Factory Bins
na bin vt v6 manual extended bin runs well. How did you go with the egr flag showing still?The1 wrote:its in beta, but havn't had any testers, if you want to beta test let me know.