VS-VY Enhanced Factory Bins

For discussion and distribution of custom code and hacks
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: The1's Enhanced Factory Bins

Post by Wade »

If I change diff gears in my vy will I need a speedo corrector? And what parts of the tune need changing?
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Post by The1 »

Just change speedo ppk with tech2
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: The1's Enhanced Factory Bins

Post by Wade »

What’s the knock sensor logic enable, variable option and cylinder nok sensor present used for?
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Post by The1 »

to turn it on/off and per cyl
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: The1's Enhanced Factory Bins

Post by Wade »

Ok cheers mate
Wade
Posts: 562
Joined: Mon Jul 11, 2016 6:29 am
cars: Vr 5.0 statesman vr exec 5.0 turbo vy clubsport

Re: The1's Enhanced Factory Bins

Post by Wade »

The1 can you add injector blm% in the vy flash adx. So I can use the injector multiplier spread sheet. Or will the vx adx Work just for those changes
User avatar
The1
Posts: 4694
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Post by The1 »

they are already in there.

Left Hand Short Term Fuel Correction %
Right Hand Short Term Fuel Correction %
Left Hand Long Term Fuel Correction %
Right Hand Long Term Fuel Correction %
User avatar
krusty
Posts: 570
Joined: Wed Jan 27, 2010 9:45 pm
cars: VY Calais guzzler, Toyota Corolla almost hybrid
Location: Melbourne, VIC

Re: The1's Enhanced Factory Bins

Post by krusty »

The1 wrote:VT V8 enhanced updated to v1.0 it now has Knock Active Loops and Pin A5 B10 enabled
Having trouble logging on a VT1 5L using VTV8 enhanced and NVRAM. Does a wiring mod need to be done to the pcm circuit board to allow logging and RT adjustment?
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: The1's Enhanced Factory Bins

Post by delcowizzid »

Shouldn't need any mods do you have the later nvram module from here with vs/vt selection jumper
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
krusty
Posts: 570
Joined: Wed Jan 27, 2010 9:45 pm
cars: VY Calais guzzler, Toyota Corolla almost hybrid
Location: Melbourne, VIC

Re: The1's Enhanced Factory Bins

Post by krusty »

delcowizzid wrote:Shouldn't need any mods do you have the later nvram module from here with vs/vt selection jumper
Yeah later one with VT selected and RW enabled.
Post Reply