VS-VY Enhanced Factory Bins
Re: The1's Enhanced Factory Bins
it's unfortunate, i really need more people interested in enhanced otherwise it's just not worth mine and other people's time to do more development, your the only one that's been interested in V8 Stuff and been helpful with testing. The beta's get zero to little feedback, hence no development of late though time is hard to find for me.
Im happy to be proven wrong, i have bumped vs/vt v8 to the top to get the inputs enabled to the datastream for logging and KAL, one other person has requested inputs. The higher speed datalogging MSG12 is the only other thing on the table at the moment. MAP is of coarse on everyone's wish list, i have done a bit with this but it's a huge project.
Im happy to be proven wrong, i have bumped vs/vt v8 to the top to get the inputs enabled to the datastream for logging and KAL, one other person has requested inputs. The higher speed datalogging MSG12 is the only other thing on the table at the moment. MAP is of coarse on everyone's wish list, i have done a bit with this but it's a huge project.
-
- Posts: 186
- Joined: Fri Jul 09, 2010 10:01 pm
- cars: VY s L67
Haines Hunter - not a car but still a toy
Re: The1's Enhanced Factory Bins
More then happy to help out with anything you need for flash PCM's.
I would really like to have the ability to control spark all the way but i know you have put these PCMs on hold for now
I know a few people are keen on these
I would really like to have the ability to control spark all the way but i know you have put these PCMs on hold for now
I know a few people are keen on these
Re: The1's Enhanced Factory Bins
yes flash pcm's would be nice, but the nvram factor makes it not worthwhile atm.
-
- Posts: 186
- Joined: Fri Jul 09, 2010 10:01 pm
- cars: VY s L67
Haines Hunter - not a car but still a toy
Re: The1's Enhanced Factory Bins
Yeah the navram would be nice.
I do spend most if not all my time tuning by myself so apart from getting idle right and a few other minor things i really have no choice to take a log and review it later to make my changes then flash the new cal back in.
If i get to the dyno one day that's a different story.
Anyway if you pick it back up let me know ill and ill test what ever you need.
I also have 2 VT SS series 1 5L's in the family one manual one auto so if you want a hand i can help out a bit but i don't have a chip burner
Is there the possibility to have flex out puts on non 808 PCM's?
I was thinking about running a cooling fan for a water to air intercooler when the car is traveling under something like 20 kph
I do spend most if not all my time tuning by myself so apart from getting idle right and a few other minor things i really have no choice to take a log and review it later to make my changes then flash the new cal back in.
If i get to the dyno one day that's a different story.
Anyway if you pick it back up let me know ill and ill test what ever you need.
I also have 2 VT SS series 1 5L's in the family one manual one auto so if you want a hand i can help out a bit but i don't have a chip burner
Is there the possibility to have flex out puts on non 808 PCM's?
I was thinking about running a cooling fan for a water to air intercooler when the car is traveling under something like 20 kph
Re: The1's Enhanced Factory Bins
not on Flash pcm's, there's no spare inputs either . On memcal based pcm's i have on the list to repurpose the old Boost Solenoid Control Line
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: The1's Enhanced Factory Bins
No worries. Yea as your aware I'm very much happy to try any beta versions that you develop and more than thankful for them.The1 wrote:it's unfortunate, i really need more people interested in enhanced otherwise it's just not worth mine and other people's time to do more development, your the only one that's been interested in V8 Stuff and been helpful with testing. The beta's get zero to little feedback, hence no development of late though time is hard to find for me.
Im happy to be proven wrong, i have bumped vs/vt v8 to the top to get the inputs enabled to the datastream for logging and KAL, one other person has requested inputs. The higher speed datalogging MSG12 is the only other thing on the table at the moment. MAP is of coarse on everyone's wish list, i have done a bit with this but it's a huge project.
I only have the 1 vt v8 at the moment but all setup with real time etc and have burners and Plenty of memcals to trial on other vehicles if you need anything beta tested ( though not s/c yet)
Some more flexibility in the vt would be great though I know the code takes a lot of time.
You were saying the vt PCM had bugger all space left?
Though mine is a manual and they run the same PCM auto and manual you can't delete the auto portion of the code base and replace with extra functions if I remember right?
Re: The1's Enhanced Factory Bins
im not really aware about the V8 Programs, so far only having dont the MAF and Spark Cut Mods, i am currently working on the input mods for it now so you dont have to use the injector line.
Re: The1's Enhanced Factory Bins
hmm looking at the VT V8 5.0L code im sure they didn't have EGR? cause EGR code is in there, which means free spare to clear and extra ram variables!
-
- Posts: 186
- Joined: Fri Jul 09, 2010 10:01 pm
- cars: VY s L67
Haines Hunter - not a car but still a toy
Re: The1's Enhanced Factory Bins
Hey The1 on my wiring digrams the NZ flash PCM's had a map sesnor input could that be used as a input for WB or what ever?
Re: The1's Enhanced Factory Bins
was it pin A7 i think i tried to find the register for it but didn't. I think think it's real map but just map code that was left for auto trans use. Could be wrong about export models, the tune maybe different to. Anyway got a copy?