VS-VY Enhanced Factory Bins
-
- Posts: 3424
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: The1's Enhanced Factory Bins
Cheers mate.
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: The1's Enhanced Factory Bins
Just Curious as ive only just come across this issue now, But on the non Flash VX and VY PCMs, You have the ability to check the box for a DTC92 low speed fan req when running a PCM standalone without the BCM.
Now with the VX and VY flash based PCMs it doesn't have that flag, and i was wondering do those PCMs set a FAN ON as soon as ignitions on when missing the BCM like the VT etc.
Reason being is ive got a guy with a VX eco in a Hilux, re flashed it to suit a manual but he is getting a key on fan on which is normal of a DTC 92 when running without BCM. Done plenty in past and ive never had one come back with the fan on that i can remember?
(VATS all ready off)
Now with the VX and VY flash based PCMs it doesn't have that flag, and i was wondering do those PCMs set a FAN ON as soon as ignitions on when missing the BCM like the VT etc.
Reason being is ive got a guy with a VX eco in a Hilux, re flashed it to suit a manual but he is getting a key on fan on which is normal of a DTC 92 when running without BCM. Done plenty in past and ive never had one come back with the fan on that i can remember?
(VATS all ready off)
Re: The1's Enhanced Factory Bins
i never put it in as i think i found it was already off on flash pcm's from what i remember, do you have a scantool to verify if that DTC is active? If it is i can revisit.
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: The1's Enhanced Factory Bins
The auto sparky does, but won’t connect as I think it’s polling for bcm heartbeat before allowing comms to pcm? I could get him to rig up the CE to flash out the codes.The1 wrote:i never put it in as i think i found it was already off on flash pcm's from what i remember, do you have a scantool to verify if that DTC is active? If it is i can revisit.
That’s what I thought was a bit strange as I don’t ever think it’s been a problem in the past.
Re: The1's Enhanced Factory Bins
Are you able to try this? The original location had it off but this one has it on, there's 2 locations in most bins one for the CEL and one for DTC Disable. Hopefully this is DTC Disable.
- Attachments
-
- VX_V6_$BD_Enhanced_v0.9g.xdf
- (294.94 KiB) Downloaded 271 times
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: The1's Enhanced Factory Bins
I'll load that up and throw it on an ecu and send to him to see if thats the issue
Thanks Nigel
Thanks Nigel
Re: The1's Enhanced Factory Bins
I've just flashed my VY NA V6 with this and I'm not sure if the stock tune just needed a touch up but wow I can feel a difference.
I have one question though, have I disabled DFCO correctly?
I have one question though, have I disabled DFCO correctly?
- Attachments
-
- DFCO.PNG (23.48 KiB) Viewed 7884 times
-
- Posts: 3424
- Joined: Thu Apr 09, 2009 12:31 pm
- cars: VH, VN, VS, VX
Re: The1's Enhanced Factory Bins
Normally all you need to do is increase the ECT to the maximum to disable so you have well and truly disabled it.
Not sure why you want to though?
Not sure why you want to though?
- hsv08
- Posts: 547
- Joined: Thu May 09, 2013 6:50 pm
- cars: (EX) VT SENATOR 355 STROKER
(EX) VT SS 304 MANUAL
NOW VX V6 HACK
Re: The1's Enhanced Factory Bins
You can do it that way, but normally just lifting the coolant temp to 151 degrees will stop dfco from being active. It can't meet that threshold therefore will never activate whilst under it.AgedFast wrote:I've just flashed my VY NA V6 with this and I'm not sure if the stock tune just needed a touch up but wow I can feel a difference.
I have one question though, have I disabled DFCO correctly?
Re: The1's Enhanced Factory Bins
Thanks, I'm still learning so didn't know if it was a "any of these conditions" type situation
Building a burnout car and trying to work out exhaust crackle and lumpy idle.
Building a burnout car and trying to work out exhaust crackle and lumpy idle.