The1's Enhanced Factory Bins

For discussion and distribution of custom code and hacks
Posts: 109
Joined: Sat Mar 21, 2009 8:59 am

Re: The1's Enhanced Factory Bins

Postby stevedarman » Mon Jun 02, 2014 11:34 am

Has anyone used the VT PCM retuned to control LPG vapor injectors?
rather than using a LPG ECU,
I think the main problem will be the gas injectors i measured resistance of 2 ohms
I would like to hear if anyone is running vapor injection on a delco PCM

User avatar
Posts: 4158
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Postby The1 » Mon Jun 02, 2014 10:55 pm

ive seen a vapor injector setup, but it had it's own ecu

Posts: 72
Joined: Mon Feb 13, 2012 6:22 pm

Re: The1's Enhanced Factory Bins

Postby trikky73 » Wed Jun 11, 2014 6:57 am

I am running the BRC vapour injection with the enhanced factory bin, actually this is the one The1 has seen :)
Only issue we have had is if the PWR enrichment was a bit aggressive it would miss on LPG and when I went to bigger petrol injectors the LPG was thrown out (too lean) but this would have been easily corrected via getting the LPG ECU retuned

I have not heard of any retro fitting of vapour injectors to replace the petrol injectors but I believe that it is possible with liquid LPG injectors but the system is a lot more complex as it runs a pump in the LPG tank to feed the LPG at higher pressure and also has a return line back to the LPG tank hence why the increased costs in the installation
Looked into this option when I did my conversion but could not justify the added costs of the conversion

User avatar
Posts: 4158
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Postby The1 » Mon Jun 16, 2014 11:43 pm

vs v6 n/a and vs v6 s/c version are reuploaded with version A on the adx and xdf

adx and xdf are now linked so table bubbles will work
the table "Idle Airflow Learning - Airflow Vs RPM in Gear 1-4" has been fixed which had incorrect order.
adx values on some items tweaked

User avatar
Posts: 569
Joined: Wed Jan 27, 2010 9:45 pm
Location: Melbourne, VIC

Re: The1's Enhanced Factory Bins

Postby krusty » Tue Jun 17, 2014 8:09 am

The1 wrote:vs v6 n/a and vs v6 s/c version are reuploaded with version A on the adx and xdf

adx and xdf are now linked so table bubbles will work
the table "Idle Airflow Learning - Airflow Vs RPM in Gear 1-4" has been fixed which had incorrect order.
adx values on some items tweaked


Thanks Nigel ;) Bubbles are good

User avatar
Posts: 4158
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Postby The1 » Mon Jun 23, 2014 9:28 pm

VS V6 and VS V6 S/C Bins have been updated, there has been a bug fix, if using pin A5 it caused a increase in spark idle by 10degree's from commanded, only at idle in drive if auto, please download the new version.

Posts: 2596
Joined: Thu Apr 09, 2009 12:31 pm

Re: The1's Enhanced Factory Bins

Postby immortality » Mon Aug 04, 2014 5:32 pm

Tried to use the VT SC enhanced ADX today but Tunerpro would not connect to the PCM properly. It showed that it was connected but was not sending any data(0hz). Changed over to the VX SC enhanced ADX and that would connect and showing about 11hz and logged fine.

The only thing I can think that may have been an issue is that I was still using the OSE v1.47 plugin? Have updated to v1.50 this evening so will hopefully test again tomorrow if/when the owner swings by.

Thanks

edit: had a few other issues but I'll start another thread for that.

Site Admin
User avatar
Posts: 5851
Joined: Sat Feb 28, 2009 8:34 pm

Re: The1's Enhanced Factory Bins

Postby antus » Mon Aug 04, 2014 7:05 pm

There shouldnt be any difference betwen 1.47 and 1.50 - nothing has changed that would affect that setup.

Reports of what works and what doesnt are appreciated (especially when you have 1 of each on the same hardware). Things get a lot more complicated on VT, and I dont have a vehicle to test on. I think some ADXs are set up better than others, so knowing what works for you and what doesnt gives us good base to improve on. Theoretically when set up the same they should all work just fine.
Have you read the FAQ? For lots of information and links to significant threads see here: viewtopic.php?f=7&t=1396

Posts: 2596
Joined: Thu Apr 09, 2009 12:31 pm

Re: The1's Enhanced Factory Bins

Postby immortality » Mon Aug 04, 2014 7:15 pm

Yeah, the more I think about it the more I'm inclined to agree it's not an issue with the plugin as it did connect but didn't send any data.

I haven't yet had a chance to compare the ADX files, hopefully tomorrow I'll get to spend a little time comparing them and see if there are any variations.

User avatar
Posts: 4158
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Postby The1 » Mon Aug 04, 2014 7:32 pm

did you have the correct vehicle selected in the plugin dropdown? as adx no longer does the silence. Also of note depending on model say calais or berlina are worse you have to hit the oseplugin connect icon 2-3 times to get the packet in, you know when it worked as the cluster will then have a spack. So the fact it worked on vx later might have been that it needed 2-3 goes to silence

PreviousNext

Return to Custom Code

Who is online

Users browsing this forum: No registered users and 2 guests