The1's Enhanced Factory Bins

For discussion and distribution of custom code and hacks
Posts: 3206
Joined: Mon Aug 02, 2010 6:35 pm

Re: The1's Enhanced Factory Bins

Postby Dylan » Sat May 30, 2015 9:46 pm

Thanks mate. I found an VS ecotec auto memcal in stock.
Once my eraser turns up I'll do the front door mod and then try again.

User avatar
Posts: 4322
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Postby The1 » Sun May 31, 2015 7:33 pm

VT V6 N/A Automatic bin version has been updated, issues writing when using nvram's is fixed. Manual Version was not affected.

Posts: 3206
Joined: Mon Aug 02, 2010 6:35 pm

Re: The1's Enhanced Factory Bins

Postby Dylan » Sun Jun 07, 2015 7:52 pm

What version is the VS 3 V8 based on? Noticed the factory auto ones had some different shift points in the auto bin's.

User avatar
Posts: 4322
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Postby The1 » Sun Jun 07, 2015 11:53 pm

DRRS2641

Posts: 3206
Joined: Mon Aug 02, 2010 6:35 pm

Re: The1's Enhanced Factory Bins

Postby Dylan » Mon Jun 08, 2015 12:33 pm

I burnt the enhanced bin to a standard eprom. Only mods were bit more timing in some area's.
Ran it in my mate's 2000 model VS3 ute. It had the CYJN memcal in it which I noticed was recalled.

With the new memcal fitted it ran and drove fine but was down on power and auto was not kicking back.
I compared the different auto tunes and there's lots of differences but wouldn't of thought they'd make it run like that.
Another thing in the back of my head is that I only had the eprom under my uv light for 10 minute's.
It was pointed out to me in another thread that it might not of been enough?

User avatar
Posts: 4322
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Postby The1 » Mon Jun 08, 2015 2:19 pm

did you read the memcal back and compair to the bin you burnt? if not they you have no way of knowing if it burnt correctly.

Posts: 3206
Joined: Mon Aug 02, 2010 6:35 pm

Re: The1's Enhanced Factory Bins

Postby Dylan » Mon Jun 08, 2015 2:27 pm

I did compare the read afterwards and tuner pro brought up 0 bytes different.
I noticed the DRRRS is a 195kw version this ute is standard 180kw. I've copied the CYJN differences into the enhanced bin to see what happens next time.
Auto shift points and power enrichment and injector multiplier were different. I'm really surprised this wasn't compatible. I thought they were very compatible.
Still not ruling out me doing something wrong. CYJN was recalled but I don't know why. Its listed as the first VS3 tune and DRRS is the last tune.
Might try and see if they changed transmissions over this period.

This is the bin as I read it back. Going into a ute running CYJN.
Attachments
ReadBack.bin
(128 KiB) Downloaded 119 times

User avatar
Posts: 4322
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Postby The1 » Tue Jun 09, 2015 8:10 pm

the recall as far as i know was due to a restart bug, basicly leaving the car unable to start at next keyon, was random.

the differences between standard and 195kw arn't much, mainly just a little bit of spark and shift patterns, it's a better base bin for sure and also has the fixs in it so hence why i used it for enhanced. Working fine on other VS V8's

Your bin looks ok to me.

User avatar
Posts: 4322
Joined: Mon Jan 04, 2010 10:23 am

Re: The1's Enhanced Factory Bins

Postby The1 » Tue Jun 09, 2015 8:17 pm

ive released 0.82 for VS V8, fixed the MAF tables in the XDF, few changes with ADX and put the stock V8 MAF tables in with the linear curve. I doubt that would have caused any issues but give it a go.

Posts: 3206
Joined: Mon Aug 02, 2010 6:35 pm

Re: The1's Enhanced Factory Bins

Postby Dylan » Tue Jun 09, 2015 8:18 pm

Thanks for that. Im hoping to have another try in the coming weeks.
Im new to these electronic auto's so it's a bit daunting at first.

PreviousNext

Return to Custom Code

Who is online

Users browsing this forum: No registered users and 4 guests