OSE 12P V112

For discussion and distribution of custom code and hacks
Post Reply
User avatar
Dec_head
Posts: 505
Joined: Thu Dec 17, 2009 10:33 pm
cars: VR Calais

Re: OSE 12P

Post by Dec_head »

This was for tp5 jayme posted it in another thread
https://pcmhacking.net/forums/down ... php?id=979
UCMatt
Posts: 86
Joined: Mon May 11, 2009 4:00 pm
cars: VE Sportwagon
VYExec
VN V8 UC Torana Hatch

Re: OSE 12P

Post by UCMatt »

I have headded down a similar path with VE Learn, logging VE with TP while VE Learn is enabled, then averaging.
The results look encouraging.
Tinker
Posts: 81
Joined: Sat Feb 13, 2010 12:37 pm

Re: OSE 12P

Post by Tinker »

Hi all , I have just modified the adx files that Holden202 worked on to run with Autoprom and Tunnerpro V5 . With help form macros in the file jayme posted now all 1,2,3 bar adx files will work with V5


Hope this helps someone .
Attachments
OSE_$12P_v1.05_3BAR_TP5.adx
(73.46 KiB) Downloaded 544 times
OSE_$12P_v1.05_2BAR_TP5 .adx
(71.53 KiB) Downloaded 554 times
OSE_$12P_v1.05_1BAR_TP5.adx
(72.54 KiB) Downloaded 548 times
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: OSE 12P

Post by VL400 »

Excellent work there Tinker :thumbup:
User avatar
VL400
Posts: 4991
Joined: Sun Mar 01, 2009 2:54 pm
cars: VL Calais and Toyota Landcruiser. Plus some toys :)
Location: Perth, WA
Contact:

Re: OSE 12P

Post by VL400 »

For all the V6 users out there I have added a BLCD cal file to the 12P V101 zip. All calibration points are identical to what was in the BLCD bin, should be able to make a nice VN/VP V6 cal from it.
vn5000
Posts: 551
Joined: Fri Jul 17, 2009 2:11 pm
cars: vn v8 commodore
Location: GOLD COAST QLD

Re: OSE 12P

Post by vn5000 »

Does anyone know how to use vats with 12p .
Ecm sends command BD 56 E7 06 and bcm replies with BD 57 01 08 E3 when using std $12 bin.
I assume this reply is unique to every bcm and must have to match the 08 E3 on ecm eprom somewhere .
Does anyone know what address this Bcm code is located in std$12 and ose$12p. :study:
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: OSE 12P

Post by delcowizzid »

turn vats on and as long as you select the right version of vats in the tune for the car vr for vr and vs for vs it will work fine.
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
vn5000
Posts: 551
Joined: Fri Jul 17, 2009 2:11 pm
cars: vn v8 commodore
Location: GOLD COAST QLD

Re: OSE 12P

Post by vn5000 »

Cheers ,thanks for that Delcowizzard.
I always thought that the ECM and BCM were a matched pair, and if you changed one you had to change the other .
Vl400 must have changed the code in $12p so that the ECM will accept any BCM "key".
Ill give it a go and see what happens.
User avatar
delcowizzid
Posts: 5493
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ
Contact:

Re: OSE 12P

Post by delcowizzid »

vs v6 onwards you need matching ecu and bcm if i remember correctly but the tune doesnt matter at all they are all the same
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
User avatar
antus
Site Admin
Posts: 8237
Joined: Sat Feb 28, 2009 8:34 pm
cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B
Contact:

Re: OSE 12P

Post by antus »

I think the bcm is matched to the key. if someone smashes the lock then the bcm wont see the right key and wont answer the ecu and the car wont start. the '808 has no eeprom and the memcals are not writeable and are swappable, so there is nothing that tricky about it. It probably changes with newer more complex pcms somewhere along the line. im no expert on that subject.

heh, delcowizid, beat me to an answer. So the eeprom in the vs+ must be used for tieing them together.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
Post Reply