OSE 12P V112
Re: OSE 12P V112
Hi this is my First Post on the forum, ive been using 12p for a while now with and very happy with it. Im interested in the custom message 6 adx files for faster logging speed. I can connect to the car with the msg 6 adx file, but the data isnt right. ive read through the 12p advanced tuning pages about this section and im a bit lost with it all. I DONT have a NVRAM, my question is do i need one? Thanks Paul
- antus
- Site Admin
- Posts: 8250
- Joined: Sat Feb 28, 2009 8:34 pm
- cars: TX Gemini 2L Twincam
TX Gemini SR20 18psi
Datsun 1200 Ute
Subaru Blitzen '06 EZ30 4th gen, 3.0R Spec B - Contact:
Re: OSE 12P V112
You need to use the delco flash tool to configure the contents of message 6 to be the data items you want. It'll update you bin (on disk) and generate an adx to suit. Its up to you how you put that bin in the car, and be sure to use the matching adx.
Have you read the FAQ? For lots of information and links to significant threads see here: http://pcmhacking.net/forums/viewtopic.php?f=7&t=1396
-
- Posts: 1833
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: OSE 12P V112
I am using 12P and need to know how to set it for a manual transmission. The reason being I adjusted the desired idle speed for a manual to 1000rpm and when I did a log it showed it very different to what I set. It was around 750rpm. I looked at the auto setting for desired idle speed and it was the same as the log so I set that also to 1000rpm. As well in the log in the item list and the very last item says automatic transmission. How can I change it? Thanks in advance.
Re: OSE 12P V112
Just cut b10 grey wire on the ecm plug it s grounded in autos and left ungrounded in manuals that's all you have to do
- Holden202T
- Posts: 10311
- Joined: Sat Feb 28, 2009 9:05 pm
- Location: Tenambit, NSW
- Contact:
Re: OSE 12P V112
I thought It was switched in auto and always grounded in manual ?
No matter what the question is, the answer is always more horsepower!
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
Just starting out? Have a read of the getting started guide
Basic tuning of a delco ECM with $12P thread
Advanced tuning of a delco ECM with $12P thread
- vlad01
- Posts: 7796
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: OSE 12P V112
Looking at what poor wiring diagrams are left available on the net, yes it seems thats the case.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
- vlad01
- Posts: 7796
- Joined: Mon Oct 08, 2012 6:41 pm
- cars: VP I S
VP I executive
VP II executive
VP II executive #2
VR II executive - Location: Kyneton, Vic
Re: OSE 12P V112
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.
Re: OSE 12P V112
Yea that's for the starter operation but if you shift it into any gear but neutral and park then turn the ignition on the Ecu will say manual because that wire on b10 from the Ecu is grounded if you just cut that wire at the ecu plug it will be manual those diagrams are all a bit misleading there should be two dashed wires descriptors in there for the manual one to bypass the p/n switch and the missing wire from b10 to the p/n switch
-
- Posts: 1833
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: OSE 12P V112
Thanks Dazza. I had a look at my genuine VN workshop manual and yes that circuit is only used for the auto and yes it does get a little confusing but from what I gather if the ECU sees an earth on that terminal it then has input to the ISC motor and it also mentions VSS which I assume that's the diagnosis side with the auto trans inhibitor switch. I'll disconnect it and see what happens. Thanks again.
-
- Posts: 1833
- Joined: Sat Aug 06, 2011 7:58 am
- cars: V8 VR Commodore BT1
LB Lancer 2L turbo & Delco
Starion TBI with Delco
Mitsubishi Lancer EVO4 track car
NA MX5
3 vintage motor bikes - Location: Padstow NSW
Re: OSE 12P V112
Just cut B10 and it now says manual. Thanks Dazza.