Hi all,
looking to convert a VR V6 $11 to manual, owner doesn't want to change loom or PCM , im looking for help as to where to start..
Cheers.
VR V6 Auto converting to manual with auto PCM
VR V6 Auto converting to manual with auto PCM
According to chemistry, alcohol is a solution...
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VR V6 Auto converting to manual with auto PCM
theres a how too on justcommodores.just disable auto error codes in the tune turn the idle screw in until it doesnt stall coming to a stop from a roll and wire the speedo sender direct to the dash via the dash loom plug by the ecu .and send it out the door LOL
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem
Re: VR V6 Auto converting to manual with auto PCM
Thanks delcowizzid, found and read how to on the other site, i probably should have been clearer, the mechanical part is a breeze, the tune for me isn't, surely just disabling the error codes isn't all there is to it?
According to chemistry, alcohol is a solution...
- delcowizzid
- Posts: 5493
- Joined: Sat Feb 28, 2009 8:38 pm
- Location: Wellington NZ
- Contact:
Re: VR V6 Auto converting to manual with auto PCM
can tune fuel and timing while your there but cant really turn it into manual ecu or anything
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem