OSE 11P V104

For discussion and distribution of custom code and hacks
User avatar
Posts: 10112
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: OSE 11P V104

Postby Holden202T » Thu Aug 06, 2020 12:36 pm

have you tried changing kickdown settings so it wont kickdown ?

Posts: 93
Joined: Mon Jul 14, 2014 7:56 pm

Re: OSE 11P V104

Postby BARBS » Tue Aug 11, 2020 8:30 pm

Yeah i did that but still didnt have much success.
Just wondering if anyone else has had trouble using the solenoid controls in Tunerpro at the top there.
I can send a pic of what i mean if that helps? It is the same drop box where you lock the timing or reset the BLMs. the solenoid controls are not correct.

User avatar
Posts: 10112
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: OSE 11P V104

Postby Holden202T » Mon Aug 24, 2020 1:10 pm

yeah i have only ever used the fan ones from that list.

User avatar
Posts: 6882
Joined: Mon Oct 08, 2012 6:41 pm
Location: Kyneton, Vic

Re: OSE 11P V104

Postby vlad01 » Mon Aug 24, 2020 1:59 pm

Same, only used the fan one and iirc the clear engine codes one and that's as far as I have gone.

I have only used 11P on a manual as well which doesn't help.
I'm the director of VSH (Vlad's Spec Holden), because HSV were doing it ass about.

User avatar
Posts: 5370
Joined: Sat Feb 28, 2009 8:38 pm
Location: Wellington NZ

Re: OSE 11P V104

Postby delcowizzid » Mon Aug 24, 2020 7:48 pm

Easiest to either unplug the round plug on the gearbox or change the shift settings tempory while on the dyno or start your runs higher and roll into it
If Its Got Gas Or Ass Count Me In.if it cant be fixed with a hammer you have an electrical problem

Posts: 317
Joined: Fri Apr 03, 2009 9:21 am
Location: Blue Mountains NSW

Re: OSE 11P V104

Postby mag » Sun Dec 20, 2020 9:05 pm

Been a while since posting, grand plans take time. Back to running $12p code on 808 and eventually tuned for an SC14 on a vn v6. Have recently experienced paddle change transmission and think fitted to the vn would be fun. A search of this site shows the subject has only been discussed. Any chance that $11p code will be modified to add paddle control.

User avatar
Posts: 10112
Joined: Sat Feb 28, 2009 9:05 pm
Location: Tenambit, NSW

Re: OSE 11P V104

Postby Holden202T » Wed Dec 23, 2020 10:10 am

Given the VL400 has been MIA for some time now i would suggest there is nothing coming anytime soon.

Posts: 317
Joined: Fri Apr 03, 2009 9:21 am
Location: Blue Mountains NSW

Re: OSE 11P V104

Postby mag » Wed Dec 23, 2020 10:40 am

Thanks for the reply Holden202T, maybe you can answer a question that would assist my understanding of the requirements for a paddle shifted 4l60e. Would simply over-riding the pcm A/B and TCC solenoids signals while the transmission is still connected to the pcm be acceptable to both the pcm and the transmission. I am hoping that by only interrupting the solenoid signals, that the line pressure will continue to be correctly controlled by the pcm.

User avatar
Posts: 354
Joined: Sun Oct 28, 2012 12:57 pm

Re: OSE 11P V104

Postby 'quipt4it » Wed Dec 23, 2020 3:27 pm

Hi mag,
There are transmission controllers to do this.
Look up thirdgen.org for some tips
HTH

User avatar
Posts: 354
Joined: Sun Oct 28, 2012 12:57 pm

Re: OSE 11P V104

Postby 'quipt4it » Wed Dec 23, 2020 3:47 pm

Don't know if I hit the mark with what you're asking, but here is more
https://www.camaros.net/threads/paddle- ... ic.147532/

Previous

Return to Custom Code

Who is online

Users browsing this forum: No registered users and 2 guests